home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
NeXTSTEP 3.3 (Developer)…68k, x86, SPARC, PA-RISC]
/
NeXTSTEP 3.3 Dev Intel.iso
/
NextDeveloper
/
Source
/
GNU
/
cctools
/
as
/
m68k.c
< prev
next >
Wrap
C/C++ Source or Header
|
1994-09-06
|
90KB
|
4,021 lines
#undef CHECK_WORD_IMMEDIATES /* bug #26863 */
/* m68k.c All the m68020 specific stuff in one convenient, huge,
slow to compile, easy to find file.
Copyright (C) 1987 Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
GAS is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 1, or (at your option)
any later version.
GAS is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with GAS; see the file COPYING. If not, write to
the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <ctype.h>
#include "m68k-opcode.h"
#include "as.h"
#include "obstack.h"
#include "struc-symbol.h"
#include "flonum.h"
#include "expr.h"
#include "hash.h"
#include "frags.h"
#include "fixes.h"
#include "read.h"
#include "md.h"
#ifndef NeXT
#include "m68k.h"
#endif /* NeXT */
#include "xmalloc.h"
#include "sections.h"
#include "messages.h"
#include "atof-ieee.h"
#include "input-scrub.h"
#include "symbols.h"
/*
* These are the default cputype and cpusubtype for the m68k architecture.
*/
const cpu_type_t md_cputype = CPU_TYPE_MC680x0;
cpu_subtype_t md_cpusubtype = CPU_SUBTYPE_MC680x0_ALL;
/* This is the byte sex for the m68k architecture */
const enum byte_sex md_target_byte_sex = BIG_ENDIAN_BYTE_SEX;
/*
* This array holds the chars that always start a comment. If the
* pre-processor is disabled, these aren't very useful.
*/
const char md_comment_chars[] = "|";
/*
* This array holds the chars that only start a comment at the beginning of
* a line. If the line seems to have the form '# 123 filename'
* .line and .file directives will appear in the pre-processed output.
*
* Note that input_file.c hand checks for '#' at the beginning of the
* first line of the input file. This is because the compiler outputs
* #NO_APP at the beginning of its output.
*
* Also note that a '/' followed by a '*' will always start a comment.
*/
const char md_line_comment_chars[] = "#";
/* Chars that can be used to separate mant from exp in floating point nums. */
const char md_EXP_CHARS[] = "eE";
/*
* Chars that mean this number is a floating point constant.
* As in 0f12.456
* or 0d1.2345e12
*
* Also be aware that MAXIMUM_NUMBER_OF_CHARS_FOR_FLOAT may have to be
* changed in read.c . Ideally it shouldn't have to know about it at all,
* but nothing is ideal around here.
*/
const char md_FLT_CHARS[] = "rRsSfFdDxXeEpP";
/* Its an arbitrary name: This means I don't approve of it */
/* See flames below */
static struct obstack robyn;
/*
* These macros are used to encode a mode for the rlx_more field of the struct
* relax_typeS in the array md_relax_table below. The array is indexed by a
* TAB(x,y) value where x is one of BRANCH, FBRANCH, ... and y is BYTE, SHORT,
* ... Thus the array md_relax_table below is declared to match this use of
* indexes. The macro TABTYPE(xy) take the value and returns one of BRANCH,
* FBRANCH, ...
*/
#define TAB(x,y) (((x)<<2)+(y))
#define TABTYPE(xy) ((xy) >> 2)
#define BRANCH 1
#define FBRANCH 2
#define PCREL 3
#define BCC68000 4
#define DBCC 5
#define BYTE 0
#define SHORT 1
#define LONG 2
#define SZ_UNDEF 3
/*
* BCC68000 is for patching in an extra jmp instruction for long offsets
* on the 68000. The 68000 doesn't support long branches with branchs.
*/
/*
* Note that calls to frag_var need to specify the maximum expansion needed.
* This is currently 10 bytes for DBCC.
*/
/*
* This table desribes how you change sizes for the various types of variable
* size expressions. This version only supports two kinds.
* The fields are:
* How far Forward this mode will reach:
* How far Backward this mode will reach:
* How many bytes this mode will add to the size of the frag
* Which mode to go to if the offset won't fit in this one
*/
const
relax_typeS
md_relax_table[] = {
{ 1, 1, 0, 0 }, /* First entries aren't used */
{ 1, 1, 0, 0 }, /* For no good reason except */
{ 1, 1, 0, 0 }, /* that the VAX doesn't either */
{ 1, 1, 0, 0 },
{ (127), (-128), 0, TAB(BRANCH,SHORT)},
{ (32767), (-32768), 2, TAB(BRANCH,LONG) },
{ 0, 0, 4, 0 },
{ 1, 1, 0, 0 },
{ 1, 1, 0, 0 }, /* FBRANCH doesn't come BYTE */
{ (32767), (-32768), 2, TAB(FBRANCH,LONG)},
{ 0, 0, 4, 0 },
{ 1, 1, 0, 0 },
{ 1, 1, 0, 0 }, /* PCREL doesn't come BYTE */
{ (32767), (-32768), 2, TAB(PCREL,LONG)},
{ 0, 0, 4, 0 },
{ 1, 1, 0, 0 },
{ (127), (-128), 0, TAB(BCC68000,SHORT)},
{ (32767), (-32768), 2, TAB(BCC68000,LONG) },
{ 0, 0, 6, 0 }, /* jmp long space */
{ 1, 1, 0, 0 },
{ 1, 1, 0, 0 }, /* DBCC doesn't come BYTE */
{ (32767), (-32768), 2, TAB(DBCC,LONG) },
{ 0, 0, 10, 0 }, /* bra/jmp long space */
{ 1, 1, 0, 0 },
};
static void s_even(
int value);
static void s_proc(
int value);
/*
* These are the machine dependent pseudo-ops. These are included so
* the assembler can work on the output from the SUN C compiler, which
* generates these.
*/
/* This table describes all the machine specific pseudo-ops the assembler
* has to support. The fields are:
* pseudo-op name without dot
* function to call to execute this pseudo-op
* Integer arg to pass to the function
*/
const pseudo_typeS md_pseudo_table[] = {
{ "float", float_cons, 'f' },
{ "int", cons, 4 },
{ "word", cons, 2 },
{ "quad", big_cons, 8 },
{ "octa", big_cons, 16 },
{ "even", s_even, 0 },
{ "skip", s_space, 0 },
{ "proc", s_proc, 0 },
{ 0, 0, 0 }
};
#define issbyte(x) ((x)>=-128 && (x)<=127)
#define isubyte(x) ((x)>=0 && (x)<=255)
#define issword(x) ((x)>=-32768 && (x)<=32767)
#define isuword(x) ((x)>=0 && (x)<=65535)
#define isbyte(x) ((x)>=-128 && (x)<=255)
#define isword(x) ((x)>=-32768 && (x)<=65535)
#define islong(x) (1)
/* Operands we can parse: (And associated modes)
numb: 8 bit num
numw: 16 bit num
numl: 32 bit num
dreg: data reg 0-7
reg: address or data register
areg: address register
apc: address register, PC, ZPC or empty string
num: 16 or 32 bit num
num2: like num
sz: w or l if omitted, l assumed
scale: 1 2 4 or 8 if omitted, 1 assumed
7.4 IMMED #num --> NUM
0.? DREG dreg --> dreg
1.? AREG areg --> areg
2.? AINDR areg@ --> *(areg)
3.? AINC areg@+ --> *(areg++)
4.? ADEC areg@- --> *(--areg)
5.? AOFF apc@(numw) --> *(apc+numw) -- empty string and ZPC not allowed here
6.? AINDX apc@(num,reg:sz:scale) --> *(apc+num+reg*scale)
6.? AINDX apc@(reg:sz:scale) --> same, with num=0
6.? APODX apc@(num)@(num2,reg:sz:scale) --> *(*(apc+num)+num2+reg*scale)
6.? APODX apc@(num)@(reg:sz:scale) --> same, with num2=0
6.? AMIND apc@(num)@(num2) --> *(*(apc+num)+num2) (previous mode without an index reg)
6.? APRDX apc@(num,reg:sz:scale)@(num2) --> *(*(apc+num+reg*scale)+num2)
6.? APRDX apc@(reg:sz:scale)@(num2) --> same, with num=0
7.0 ABSL num:sz --> *(num)
num --> *(num) (sz L assumed)
*** MSCR otherreg --> Magic
With -l option
5.? AOFF apc@(num) --> *(apc+num) -- empty string and ZPC not allowed here still
examples:
#foo #0x35 #12
d2
a4
a3@
a5@+
a6@-
a2@(12) pc@(14)
a1@(5,d2:w:1) @(45,d6:l:4)
pc@(a2) @(d4)
etc . . .
#name@(numw) -->turn into PC rel mode
apc@(num8,reg:sz:scale) --> *(apc+num8+reg*scale)
*/
#define IMMED 1
#define DREG 2
#define AREG 3
#define AINDR 4
#define ADEC 5
#define AINC 6
#define AOFF 7
#define AINDX 8
#define APODX 9
#define AMIND 10
#define APRDX 11
#define ABSL 12
#define MSCR 13
#define REGLST 14
#define FAIL 0
#define OK 1
/* DATA and ADDR have to be contiguous, so that reg-DATA gives 0-7==data reg,
8-15==addr reg for operands that take both types */
#define DATA 1 /* 1- 8 == data registers 0-7 */
#define ADDR (DATA+8) /* 9-16 == address regs 0-7 */
#define FPREG (ADDR+8) /* 17-24 Eight FP registers */
#define COPNUM (FPREG+8) /* 25-32 Co-processor #1-#8 */
#undef PC
#define PC (COPNUM+8) /* 33 Program counter */
#define ZPC (PC+1) /* 34 Hack for Program space, but 0 addressing */
#define SR (ZPC+1) /* 35 Status Reg */
#define CCR (SR+1) /* 36 Condition code Reg */
#define FPI (CCR+1) /* 37 floating-point instruction register */
#define FPS (FPI+1) /* 38 floating-point status register */
#define FPC (FPS+1) /* 39 floating-point condition register */
/* These have to be in order for the movec instruction to work. */
/* The comment above should read: All the registers that can be in a movec
instruction must be bounded by USP and MSP (or SRP if BUILTIN_MMUS is
defined) for the 'J' kind of operand to be checked correctly in m68_ip() */
#define USP (FPC+1) /* 40 User Stack Pointer */
#define ISP (USP+1) /* 41 Interrupt stack pointer */
#define SFC (ISP+1) /* 42 Source function control code register */
#define DFC (SFC+1) /* 43 Destination function code register */
#define CACR (DFC+1) /* 44 Cashe control register */
#define VBR (CACR+1) /* 45 wector base register */
#define CAAR (VBR+1) /* 46 Cashe address register */
#define MSP (CAAR+1) /* 47 Master stack pointer */
#ifdef BUILTIN_MMUS
/* mc68040 mmu registers, can be used in a movec instruction */
#define ITT0 (MSP+1) /* 48 instruction transparent translation register 0 */
#define ITT1 (ITT0+1) /* 49 instruction transparent translation register 1 */
#define DTT0 (ITT1+1) /* 50 data transparent translation register 0 */
#define DTT1 (DTT0+1) /* 51 data transparent translation register 1 */
#define URP (DTT1+1) /* 53 user root pointer */
/* mc68030 and mc68040 mmu registers, can be used in a movec instruction */
#define MMUSR (URP+1) /* 52 MMU status register */
#define TC (MMUSR+1)/* 54 MMU translation control register */
#define SRP (TC+1) /* 55 supervisor root pointer */
/* mc68030 mmu registers, can't be used in a movec instruction (but rather in a
pmove instruction) */
#define CRP (SRP+1) /* 56 cpu root pointer */
#define TT0 (CRP+1) /* 57 transparent translation register 0 */
#define TT1 (TT0+1) /* 58 transparent translation register 0 */
/* mc68040 operands to cache instructions */
#define IC (TT1+1) /* 59 instruction cache */
#define DC (IC+1) /* 60 data cache */
#define BC (DC+1) /* 61 both instruction and data caches */
#endif /* BUILTIN_MMUS */
#ifdef m68851
/*
* these defines should be in m68k.c but
* i put them here to keep all the m68851 stuff
* together -rab
* JF--Make sure these #s don't clash with the ones in m68k.c
* That would be BAD.
*/
#define TC (MSP+1) /* 48 */
#define DRP (TC+1) /* 49 */
#define SRP (DRP+1) /* 50 */
#define CRP (SRP+1) /* 51 */
#define CAL (CRP+1) /* 52 */
#define VAL (CAL+1) /* 53 */
#define SCC (VAL+1) /* 54 */
#define AC (SCC+1) /* 55 */
#define BAD (AC+1) /* 56,57,58,59, 60,61,62,63 */
#define BAC (BAD+8) /* 64,65,66,67, 68,69,70,71 */
#define PSR (BAC+8) /* 72 */
#define PCSR (PSR+1) /* 73 */
#endif m68851
/* Note that COPNUM==processor #1 -- COPNUM+7==#8, which stores as 000 */
/* I think. . . */
#undef SP
#define SP ADDR+7
/* JF these tables here are for speed at the expense of size */
/* You can replace them with the #if 0 versions if you really
need space and don't mind it running a bit slower */
static char mklower_table[256];
#define mklower(c) (mklower_table[(unsigned char)(c)])
static char notend_table[256];
static char alt_notend_table[256];
#define notend(s) ( !(notend_table[(unsigned char)(*s)] || (*s==':' &&\
alt_notend_table[(unsigned char)(s[1])])))
#if 0
#define mklower(c) (isupper(c) ? tolower(c) : c)
#endif
struct m68k_exp {
char *e_beg;
char *e_end;
expressionS e_exp;
short e_siz; /* 0== default 1==short/byte 2==word 3==long */
};
/* Internal form of an operand. */
struct m68k_op {
char *error; /* Couldn't parse it */
int mode; /* What mode this instruction is in. */
unsigned long int reg; /* Base register */
struct m68k_exp *con1;
int ireg; /* Index register */
int isiz; /* 0==unspec 1==byte(?) 2==short 3==long */
int imul; /* Multipy ireg by this (1,2,4,or 8) */
struct m68k_exp *con2;
};
/* internal form of a 68020 instruction */
struct m68_it {
char *error;
char *args; /* list of opcode info */
int numargs;
#ifdef NeXT
char *cpus;
#endif /* NeXT */
int numo; /* Number of shorts in opcode */
short opcode[11];
struct m68k_op operands[6];
int nexp; /* number of exprs in use */
struct m68k_exp exprs[4];
int nfrag; /* Number of frags we have to produce */
struct {
int fragoff; /* Where in the current opcode[] the frag ends */
symbolS *fadd;
long int foff;
int fragty;
} fragb[4];
int nrel; /* Num of reloc strucs in use */
struct {
int n;
symbolS *add,
*sub;
long int off;
char wid;
char pcrel;
} reloc[5]; /* Five is enough??? */
};
static struct m68_it the_ins; /* the instruction being assembled */
/* Macros for adding things to the m68_it struct */
#define addword(w) the_ins.opcode[the_ins.numo++]=(w)
/* Like addword, but goes BEFORE general operands */
#define insop(w) {int z;\
for(z=the_ins.numo;z>opcode->m_codenum;--z)\
the_ins.opcode[z]=the_ins.opcode[z-1];\
for(z=0;z<the_ins.nrel;z++)\
the_ins.reloc[z].n+=2;\
the_ins.opcode[opcode->m_codenum]=(w);\
the_ins.numo++;\
}
#define add_exp(beg,end) (\
the_ins.exprs[the_ins.nexp].e_beg=(beg),\
the_ins.exprs[the_ins.nexp].e_end=(end),\
&the_ins.exprs[the_ins.nexp++]\
)
/* The numo+1 kludge is so we can hit the low order byte of the prev word. Blecch*/
#define add_fix(width,exp,pc_rel) {\
the_ins.reloc[the_ins.nrel].n= ((width)=='B') ? (the_ins.numo*2-1) : \
(((width)=='b') ? ((the_ins.numo-1)*2) : (the_ins.numo*2));\
the_ins.reloc[the_ins.nrel].add=adds((exp));\
the_ins.reloc[the_ins.nrel].sub=subs((exp));\
the_ins.reloc[the_ins.nrel].off=offs((exp));\
the_ins.reloc[the_ins.nrel].wid=(width);\
the_ins.reloc[the_ins.nrel++].pcrel=(pc_rel);\
}
#define add_frag(add,off,type) {\
the_ins.fragb[the_ins.nfrag].fragoff=the_ins.numo;\
the_ins.fragb[the_ins.nfrag].fadd=(add);\
the_ins.fragb[the_ins.nfrag].foff=(off);\
the_ins.fragb[the_ins.nfrag++].fragty=(type);\
}
#define isvar(exp) ((exp) && (adds(exp) || subs(exp)))
#define seg(exp) ((exp)->e_exp.X_seg)
#define adds(exp) ((exp)->e_exp.X_add_symbol)
#define subs(exp) ((exp)->e_exp.X_subtract_symbol)
#define offs(exp) ((exp)->e_exp.X_add_number)
struct m68_incant {
char *m_operands;
unsigned long m_opcode;
short m_opnum;
short m_codenum;
#ifdef NeXT
char *m_cpus;
#endif /* NeXT */
struct m68_incant *m_next;
};
#define getone(x) ((((x)->m_opcode)>>16)&0xffff)
#define gettwo(x) (((x)->m_opcode)&0xffff)
/*
* Declarations static functions in this file.
*/
static int m68k_reg_parse(
char **ccp);
static int m68k_ip_op(
char *str,
struct m68k_op *opP);
static int try_index(
char **s,
struct m68k_op *opP);
static void m68_ip(
char *instring);
static int get_regs(
int i,
struct m68k_op *opP,
char *str);
static int reverse_16_bits(
int in);
static int reverse_8_bits(
int in);
static void install_operand(
int mode,
int val);
static void install_gen_operand(
int mode,
int val);
static char *crack_operand(
char *str,
struct m68k_op *opP);
static int get_num(
struct m68k_exp *exp,
int ok);
/* JF modified this to handle cases where the first part of a symbol name
looks like a register */
static
int
m68k_reg_parse(
char **ccp)
{
register char c1,
c2,
c3,
c4;
#ifdef BUILTIN_MMUS
char c5;
#endif
register int n = 0,
ret = 0;
c1=mklower(ccp[0][0]);
c2=mklower(ccp[0][1]);
c3=mklower(ccp[0][2]);
c4=mklower(ccp[0][3]);
#ifdef BUILTIN_MMUS
c5=mklower(ccp[0][4]);
#endif
switch(c1) {
case 'a':
if(c2>='0' && c2<='7') {
n=2;
ret=ADDR+c2-'0';
}
#ifdef m68851
else if (c2 == 'c') {
n = 2;
ret = AC;
}
#endif
break;
#ifdef m68851
case 'b':
if (c2 == 'a') {
if (c3 == 'd') {
if (c4 >= '0' && c4 <= '7') {
n = 4;
ret = BAD + c4 - '0';
}
}
if (c3 == 'c') {
if (c4 >= '0' && c4 <= '7') {
n = 4;
ret = BAC + c4 - '0';
}
}
}
break;
#endif
#ifdef BUILTIN_MMUS
case 'b':
if (c2 == 'c') {
n = 2;
ret = (BC);
}
break;
#endif
case 'c':
#ifdef m68851
if (c2 == 'a' && c3 == 'l') {
n = 3;
ret = CAL;
} else
#endif
/* This supports both CCR and CC as the ccr reg. */
if(c2=='c' && c3=='r') {
n=3;
ret = CCR;
} else if(c2=='c') {
n=2;
ret = CCR;
} else if(c2=='a' && (c3=='a' || c3=='c') && c4=='r') {
n=4;
ret = c3=='a' ? CAAR : CACR;
}
#if defined(m68851) || defined (BUILTIN_MMUS)
else if (c2 == 'r' && c3 == 'p') {
n = 3;
ret = (CRP);
}
#endif
break;
case 'd':
if(c2>='0' && c2<='7') {
n=2;
ret = DATA+c2-'0';
} else if(c2=='f' && c3=='c') {
n=3;
ret = DFC;
}
#ifdef m68851
else if (c2 == 'r' && c3 == 'p') {
n = 3;
ret = (DRP);
}
#endif
#ifdef BUILTIN_MMUS
else if (c2 == 't' && c3 == 't' && (c4 == '0' || c4 == '1')) {
n = 4;
if(c4 == '0')
ret = (DTT0);
else
ret = (DTT1);
}
else if (c2 == 'c') {
n = 2;
ret = (DC);
}
#endif
break;
case 'f':
if(c2=='p') {
if(c3>='0' && c3<='7') {
n=3;
ret = FPREG+c3-'0';
if(c4==':')
ccp[0][3]=',';
} else if(c3=='i') {
n=3;
ret = FPI;
} else if(c3=='s') {
n= (c4 == 'r' ? 4 : 3);
ret = FPS;
} else if(c3=='c') {
n= (c4 == 'r' ? 4 : 3);
ret = FPC;
}
}
break;
case 'i':
if(c2=='s' && c3=='p') {
n=3;
ret = ISP;
}
#ifdef BUILTIN_MMUS
else if (c2 == 't' && c3 == 't' && (c4 == '0' || c4 == '1')) {
n = 4;
if(c4 == '0')
ret = (ITT0);
else
ret = (ITT1);
}
else if (c2 == 'c') {
n = 2;
ret = (IC);
}
#endif
break;
case 'm':
if(c2=='s' && c3=='p') {
n=3;
ret = MSP;
}
#ifdef BUILTIN_MMUS
if(c2=='m' && c3=='u' && c4=='s' && c5=='r') {
n=5;
ret = MMUSR;
}
#endif
break;
case 'p':
if(c2=='c') {
#ifdef m68851
if(c3 == 's' && c4=='r') {
n=4;
ret = (PCSR);
} else
#endif
{
n=2;
ret = PC;
}
}
#ifdef m68851
else if (c2 == 's' && c3 == 'r') {
n = 3;
ret = (PSR);
}
#endif
#ifdef BUILTIN_MMUS
else if (c2 == 's' && c3 == 'r') {
n = 3;
ret = (MMUSR);
}
#endif
break;
case 's':
#if defined(m68851) || defined(BUILTIN_MMUS)
if (c2 == 'r' && c3 == 'p') {
n = 3;
ret = (SRP);
}
#endif
#ifdef m68851
else if (c2 == 'c' && c3 == 'c') {
n = 3;
ret = (SCC);
}
#endif
#if defined(m68851) || defined(BUILTIN_MMUS)
else
#endif
if(c2=='r') {
n=2;
ret = SR;
} else if(c2=='p') {
n=2;
ret = ADDR+7;
} else if(c2=='f' && c3=='c') {
n=3;
ret = SFC;
}
break;
#if defined(m68851) || defined(BUILTIN_MMUS)
case 't':
if(c2 == 'c') {
n=2;
ret=TC;
}
#ifdef BUILTIN_MMUS
else if (c2 == 't' && (c3 == '0' || c3 == '1')) {
n = 3;
if(c3 == '0')
ret = (TT0);
else
ret = (TT1);
}
#endif
break;
#endif
case 'u':
if(c2=='s' && c3=='p') {
n=3;
ret = USP;
}
#ifdef BUILTIN_MMUS
else if(c2=='r' && c3=='p') {
n=3;
ret = URP;
}
#endif
break;
case 'v':
#ifdef m68851
if (c2 == 'a' && c3 == 'l') {
n = 3;
ret = (VAL);
} else
#endif
if(c2=='b' && c3=='r') {
n=3;
ret = VBR;
}
break;
case 'z':
if(c2=='p' && c3=='c') {
n=3;
ret = ZPC;
}
break;
default:
break;
}
if(n) {
if(isalnum(ccp[0][n]) || ccp[0][n]=='_')
ret=FAIL;
else
ccp[0]+=n;
} else
ret = FAIL;
return ret;
}
#define SKIP_WHITE() { str++; if(*str==' ') str++;}
static
int
m68k_ip_op(
char *str,
struct m68k_op *opP)
{
char *strend;
long i;
if(*str==' ')
str++;
/* Find the end of the string */
if(!*str) {
/* Out of gas */
opP->error="Missing operand";
return FAIL;
}
for(strend=str;*strend;strend++)
;
--strend;
/* Guess what: A constant. Shar and enjoy */
if(*str=='#') {
str++;
opP->con1=add_exp(str,strend);
opP->mode=IMMED;
return OK;
}
i=m68k_reg_parse(&str);
if((i==FAIL || *str!='\0') && *str!='@') {
char *stmp;
if(i!=FAIL && (*str=='/' || *str=='-')) {
opP->mode=REGLST;
return get_regs(i,opP,str);
}
if((stmp=index(str,'@'))) {
opP->con1=add_exp(str,stmp-1);
if(stmp==strend) {
opP->mode=AINDX;
return OK;
}
stmp++;
if(*stmp++!='(' || *strend--!=')') {
opP->error="Malformed operand";
return FAIL;
}
i=try_index(&stmp,opP);
opP->con2=add_exp(stmp,strend);
if(i==FAIL) opP->mode=AMIND;
else opP->mode=APODX;
return OK;
}
opP->mode=ABSL;
opP->con1=add_exp(str,strend);
return OK;
}
opP->reg=i;
if(*str=='\0') {
if(i>=DATA+0 && i<=DATA+7)
opP->mode=DREG;
else if(i>=ADDR+0 && i<=ADDR+7)
opP->mode=AREG;
else
opP->mode=MSCR;
return OK;
}
if((i<ADDR+0 || i>ADDR+7) && i!=PC && i!=ZPC && i!=FAIL) { /* Can't indirect off non address regs */
opP->error="Invalid indirect register";
return FAIL;
}
if(*str!='@')
abort();
str++;
switch(*str) {
case '\0':
opP->mode=AINDR;
return OK;
case '-':
opP->mode=ADEC;
return OK;
case '+':
opP->mode=AINC;
return OK;
case '(':
str++;
break;
default:
opP->error="Junk after indirect";
return FAIL;
}
/* Some kind of indexing involved. Lets find out how bad it is */
i=try_index(&str,opP);
/* Didn't start with an index reg, maybe its offset or offset,reg */
if(i==FAIL) {
char *beg_str;
beg_str=str;
for(i=1;i;) {
switch(*str++) {
case '\0':
opP->error="Missing )";
return FAIL;
case ',': i=0; break;
case '(': i++; break;
case ')': --i; break;
}
}
opP->con1=add_exp(beg_str,str-2);
/* Should be offset,reg */
if(str[-1]==',') {
i=try_index(&str,opP);
if(i==FAIL) {
opP->error="Malformed index reg";
return FAIL;
}
}
}
/* We've now got offset) offset,reg) or reg) */
if(*str=='\0') {
/* Th-the-thats all folks */
#ifdef NeXT
/* all forms using zpc must use pc@(bd,Xn) and not pc@(d16) because
you can only suppress the base register in the first form */
if(opP->reg==FAIL || opP->reg==ZPC) opP->mode=AINDX; /* Other form of indirect */
#else /* !defined(NeXT) */
if(opP->reg==FAIL) opP->mode=AINDX; /* Other form of indirect */
#endif /* NeXT */
else if(opP->ireg==FAIL) opP->mode=AOFF;
else opP->mode=AINDX;
return OK;
}
/* Next thing had better be another @ */
if(*str!='@' || str[1]!='(') {
opP->error="junk after indirect";
return FAIL;
}
str+=2;
if(opP->ireg!=FAIL) {
opP->mode=APRDX;
i=try_index(&str,opP);
if(i!=FAIL) {
opP->error="Two index registers! not allowed!";
return FAIL;
}
} else
i=try_index(&str,opP);
if(i==FAIL) {
char *beg_str;
beg_str=str;
for(i=1;i;) {
switch(*str++) {
case '\0':
opP->error="Missing )";
return FAIL;
case ',': i=0; break;
case '(': i++; break;
case ')': --i; break;
}
}
opP->con2=add_exp(beg_str,str-2);
if(str[-1]==',') {
if(opP->ireg!=FAIL) {
opP->error="Can't have two index regs";
return FAIL;
}
i=try_index(&str,opP);
if(i==FAIL) {
opP->error="malformed index reg";
return FAIL;
}
opP->mode=APODX;
} else if(opP->ireg!=FAIL)
opP->mode=APRDX;
else
opP->mode=AMIND;
} else
opP->mode=APODX;
if(*str!='\0') {
opP->error="Junk after indirect";
return FAIL;
}
return OK;
}
static
int
try_index(
char **s,
struct m68k_op *opP)
{
register int i;
char *ss;
#define SKIP_W() { ss++; if(*ss==' ') ss++;}
ss= *s;
/* SKIP_W(); */
i=m68k_reg_parse(&ss);
if(!(i>=DATA+0 && i<=ADDR+7)) { /* if i is not DATA or ADDR reg */
*s=ss;
return FAIL;
}
opP->ireg=i;
/* SKIP_W(); */
if(*ss==')') {
opP->isiz=0;
opP->imul=1;
SKIP_W();
*s=ss;
return OK;
}
if(*ss!=':') {
opP->error="Missing : in index register";
*s=ss;
return FAIL;
}
SKIP_W();
if(mklower(*ss)=='w') opP->isiz=2;
else if(mklower(*ss)=='l') opP->isiz=3;
else {
opP->error="Size spec not :w or :l";
*s=ss;
return FAIL;
}
SKIP_W();
if(*ss==':') {
SKIP_W();
switch(*ss) {
case '1':
case '2':
case '4':
case '8':
opP->imul= *ss-'0';
break;
default:
opP->error="index multiplier not 1, 2, 4 or 8";
*s=ss;
return FAIL;
}
SKIP_W();
} else opP->imul=1;
if(*ss!=')') {
opP->error="Missing )";
*s=ss;
return FAIL;
}
SKIP_W();
*s=ss;
return OK;
}
#ifdef TEST1 /* TEST1 tests m68k_ip_op(), which parses operands */
void
main(
int argc,
char *argv[],
char *envp[])
{
char buf[128];
struct m68k_op thark;
for(;;){
if(!gets(buf))
break;
memset(&thark, '\0', sizeof(thark));
if(!m68k_ip_op(buf, &thark))
printf("FAIL:");
if(thark.error)
printf("op1 error %s in %s\n",thark.error,buf);
printf("mode %d, reg %d, ",thark.mode,thark.reg);
if(thark.con1)
printf("con1: '%.*s',",
1 + thark.con1->e_end - thark.con1->e_beg,
thark.con1->e_beg);
printf("ireg %d, isiz %d, imul %d ",
thark.ireg, thark.isiz, thark.imul);
if(thark.con2)
printf("con2: '%.*s'",
1 + thark.con2->e_end - thark.con2->e_beg,
thark.con2->e_beg);
printf("\n");
}
exit(0);
}
#endif /* TEST1 */
/*
* Handle of the OPCODE hash table NULL means any use before m68_ip_begin()
* will crash.
*/
static struct hash_control *op_hash = NULL;
/*
* m 6 8 _ i p ( )
*
* This converts a string into a 68k instruction.
* The string must be a bare single instruction in sun format
* with RMS-style 68020 indirects
* (example: )
*
* It provides some error messages: at most one fatal error message (which
* stops the scan) and at most one warning message for each operand.
* The 68k instruction is returned in exploded form, since we have no
* knowledge of how you parse (or evaluate) your expressions.
* We do however strip off and decode addressing modes and operation
* mnemonic.
*
* This function's value is a string. If it is not "" then an internal
* logic error was found: read this code to assign meaning to the string.
* No argument string should generate such an error string:
* it means a bug in our code, not in the user's text.
*
* You MUST have called m86_ip_begin() once and m86_ip_end() never before using
* this function.
*/
/* JF this function no longer returns a useful value. Sorry */
static
void
m68_ip(
char *instring)
{
register char *p;
register struct m68k_op *opP;
register struct m68_incant *opcode;
register char *s;
register int tmpreg = 0,
baseo = 0,
outro = 0,
nextword;
int siz1,
siz2;
char c;
int losing;
int opsfound;
LITTLENUM_TYPE words[6];
LITTLENUM_TYPE *wordp;
if (*instring == ' ')
instring++; /* skip leading whitespace */
/* Scan up to end of operation-code, which MUST end in end-of-string
or exactly 1 space. */
for (p = instring; *p != '\0'; p++)
if (*p == ' ')
break;
if (p == instring) {
the_ins.error = "No operator";
the_ins.opcode[0] = 0;
/* the_ins.numo=1; */
return;
}
/* p now points to the end of the opcode name, probably whitespace.
make sure the name is null terminated by clobbering the whitespace,
look it up in the hash table, then fix it back. */
c = *p;
*p = '\0';
opcode = (struct m68_incant *)hash_find (op_hash, instring);
*p = c;
if (opcode == NULL) {
the_ins.error = "Unknown operator";
the_ins.opcode[0] = 0;
/* the_ins.numo=1; */
return;
}
/* found a legitimate opcode, start matching operands */
for(opP= &the_ins.operands[0];*p;opP++) {
p = crack_operand (p, opP);
if(opP->error) {
the_ins.error=opP->error;
return;
}
}
opsfound=opP- &the_ins.operands[0];
/* This ugly hack is to support the floating pt opcodes in their standard form */
/* Essentially, we fake a first enty of type COP#1 */
if(opcode->m_operands[0]=='I') {
int n;
for(n=opsfound;n>0;--n)
the_ins.operands[n]=the_ins.operands[n-1];
/* bcopy((char *)(&the_ins.operands[0]),(char *)(&the_ins.operands[1]),opsfound*sizeof(the_ins.operands[0])); */
memset((char *)(&the_ins.operands[0]), '\0',
sizeof(the_ins.operands[0]));
the_ins.operands[0].mode=MSCR;
the_ins.operands[0].reg=COPNUM; /* COP #1 */
opsfound++;
}
/* We've got the operands. Find an opcode that'll
accept them */
for(losing=0;;) {
if(opsfound!=opcode->m_opnum)
losing++;
else for(s=opcode->m_operands,opP= &the_ins.operands[0];*s && !losing;s+=2,opP++) {
/* Warning: this switch is huge! */
/* I've tried to organize the cases into this order:
non-alpha first, then alpha by letter. lower-case goes directly
before uppercase counterpart. */
/* Code with multiple case ...: gets sorted by the lowest case ...
it belongs to. I hope this makes sense. */
switch(*s) {
case '!':
if(opP->mode==MSCR || opP->mode==IMMED ||
opP->mode==DREG || opP->mode==AREG || opP->mode==AINC || opP->mode==ADEC || opP->mode==REGLST)
losing++;
break;
case '#':
if(opP->mode!=IMMED)
losing++;
else {
long t;
t=get_num(opP->con1,80);
if(s[1]=='b' && !isbyte(t))
losing++;
#ifdef CHECK_WORD_IMMEDIATES
else if((s[1]=='w' || s[1]=='z') &&
!isword(t))
losing++;
#else
else if(s[1]=='z' && !isword(t))
losing++;
#endif
}
break;
case '^':
case 'T':
if(opP->mode!=IMMED)
losing++;
break;
case '$':
if(opP->mode==MSCR || opP->mode==AREG ||
opP->mode==IMMED || opP->reg==PC || opP->reg==ZPC || opP->mode==REGLST)
losing++;
break;
case '%':
if(opP->mode==MSCR || opP->reg==PC ||
opP->reg==ZPC || opP->mode==REGLST)
losing++;
break;
case '&':
if(opP->mode==MSCR || opP->mode==DREG ||
opP->mode==AREG || opP->mode==IMMED || opP->reg==PC || opP->reg==ZPC ||
opP->mode==AINC || opP->mode==ADEC || opP->mode==REGLST)
losing++;
break;
case '*':
if(opP->mode==MSCR || opP->mode==REGLST)
losing++;
break;
case '+':
if(opP->mode!=AINC)
losing++;
break;
case '-':
if(opP->mode!=ADEC)
losing++;
break;
#ifdef NeXT
case '0':
if(opP->mode!=AINDR)
losing++;
break;
#endif /* NeXT */
case '/':
if(opP->mode==MSCR || opP->mode==AREG ||
opP->mode==AINC || opP->mode==ADEC || opP->mode==IMMED || opP->mode==REGLST)
losing++;
break;
case ';':
if(opP->mode==MSCR || opP->mode==AREG || opP->mode==REGLST)
losing++;
break;
case '?':
if(opP->mode==MSCR || opP->mode==AREG ||
opP->mode==AINC || opP->mode==ADEC || opP->mode==IMMED || opP->reg==PC ||
opP->reg==ZPC || opP->mode==REGLST)
losing++;
break;
case '@':
if(opP->mode==MSCR || opP->mode==AREG ||
opP->mode==IMMED || opP->mode==REGLST)
losing++;
break;
case '~': /* For now! (JF FOO is this right?) */
if(opP->mode==MSCR || opP->mode==DREG ||
opP->mode==AREG || opP->mode==IMMED || opP->reg==PC || opP->reg==ZPC || opP->mode==REGLST)
losing++;
break;
case 'A':
if(opP->mode!=AREG)
losing++;
break;
case 'B': /* FOO */
if(opP->mode!=ABSL)
losing++;
break;
case 'C':
if(opP->mode!=MSCR || opP->reg!=CCR)
losing++;
break;
case 'd': /* FOO This mode is a KLUDGE!! */
if(opP->mode!=AOFF && (opP->mode!=ABSL ||
opP->con1->e_beg[0]!='(' || opP->con1->e_end[0]!=')'))
losing++;
break;
case 'D':
if(opP->mode!=DREG)
losing++;
break;
case 'F':
if(opP->mode!=MSCR || opP->reg<(FPREG+0) || opP->reg>(FPREG+7))
losing++;
break;
case 'I':
if(opP->mode!=MSCR || opP->reg<COPNUM ||
opP->reg>=COPNUM+7)
losing++;
break;
case 'J':
#ifdef BUILTIN_MMUS
if(opP->mode!=MSCR || opP->reg<USP || opP->reg>SRP)
#else
if(opP->mode!=MSCR || opP->reg<USP || opP->reg>MSP)
#endif
losing++;
break;
case 'k':
if(opP->mode!=IMMED)
losing++;
break;
case 'l':
case 'L':
if(opP->mode==DREG || opP->mode==AREG || opP->mode==FPREG) {
if(s[1]=='8')
losing++;
else {
opP->mode=REGLST;
opP->reg=1<<(opP->reg-DATA);
}
} else if(opP->mode!=REGLST) {
losing++;
} else if(s[1]=='8' && opP->reg&0x0FFffFF)
losing++;
else if(s[1]=='3' && opP->reg&0x7000000)
losing++;
break;
case 'M':
if(opP->mode!=IMMED)
losing++;
else {
long t;
t=get_num(opP->con1,80);
#ifdef NeXT /* feature to try to make expressions absolute */
/* DJA -- Bug fix. allow absolute expressions */
if(! (issbyte(t) && seg(opP->con1)==SEG_ABSOLUTE) )
#else /* !defined(NeXT) */
if(!issbyte(t) || isvar(opP->con1))
#endif /* NeXT */
losing++;
}
break;
case 'O':
if(opP->mode!=DREG && opP->mode!=IMMED)
losing++;
break;
case 'Q':
if(opP->mode!=IMMED)
losing++;
else {
long t;
t=get_num(opP->con1,80);
if(t<1 || t>8 || isvar(opP->con1))
losing++;
}
break;
case 'R':
if(opP->mode!=DREG && opP->mode!=AREG)
losing++;
break;
case 's':
if(opP->mode!=MSCR || !(opP->reg==FPI || opP->reg==FPS || opP->reg==FPC))
losing++;
break;
case 'S':
if(opP->mode!=MSCR || opP->reg!=SR)
losing++;
break;
case 'U':
if(opP->mode!=MSCR || opP->reg!=USP)
losing++;
break;
/* JF these are out of order. We could put them
in order if we were willing to put up with
bunches of #ifdef m68851s in the code */
#ifdef m68851
/* Memory addressing mode used by pflushr */
case '|':
if(opP->mode==MSCR || opP->mode==DREG ||
opP->mode==AREG || opP->mode==REGLST)
losing++;
break;
#endif
#if defined(m68851) || defined(BUILTIN_MMUS)
case 'f':
if (opP->mode != MSCR || (opP->reg != SFC && opP->reg != DFC))
losing++;
break;
#endif
#ifdef m68851
case 'P':
if (opP->mode != MSCR || (opP->reg != TC && opP->reg != CAL &&
opP->reg != VAL && opP->reg != SCC && opP->reg != AC))
losing++;
break;
case 'V':
if (opP->reg != VAL)
losing++;
break;
case 'W':
if (opP->mode != MSCR || (opP->reg != DRP && opP->reg != SRP &&
opP->reg != CRP))
losing++;
break;
case 'X':
if (opP->mode != MSCR ||
(!(opP->reg >= BAD && opP->reg <= BAD+7) &&
!(opP->reg >= BAC && opP->reg <= BAC+7)))
losing++;
break;
case 'Y':
if (opP->reg != PSR)
losing++;
break;
case 'Z':
if (opP->reg != PCSR)
losing++;
break;
#endif
#ifdef BUILTIN_MMUS
case 'a':
if ((opP->mode != MSCR) || (opP->reg != SRP &&
opP->reg != CRP && opP->reg != TC))
losing++;
break;
case 'b':
if (opP->mode != MSCR || opP->reg != MMUSR)
losing++;
break;
case 'c':
if ((opP->mode != MSCR) || (opP->reg != IC &&
opP->reg != DC && opP->reg != BC))
losing++;
break;
case 'e':
if ((opP->mode != MSCR) || (opP->reg != TT0 &&
opP->reg != TT1))
losing++;
break;
#endif
default:
as_fatal("Internal error: Operand mode %c unknown",*s);
}
}
if(!losing)
break;
opcode=opcode->m_next;
if(!opcode) { /* Fell off the end */
the_ins.error="instruction/operands mismatch";
return;
}
losing=0;
}
the_ins.args=opcode->m_operands;
the_ins.numargs=opcode->m_opnum;
the_ins.numo=opcode->m_codenum;
the_ins.opcode[0]=getone(opcode);
the_ins.opcode[1]=gettwo(opcode);
#ifdef NeXT
the_ins.cpus=opcode->m_cpus;
#endif /* NeXT */
for(s=the_ins.args,opP= &the_ins.operands[0];*s;s+=2,opP++) {
/* This switch is a doozy.
What the first step; its a big one! */
switch(s[0]) {
case '*':
case '~':
case '%':
case ';':
case '@':
case '!':
case '&':
case '$':
case '?':
case '/':
#ifdef m68851
case '|':
#endif
switch(opP->mode) {
case IMMED:
tmpreg=0x3c; /* 7.4 */
if(index("bwzl",s[1]))
nextword=get_num(opP->con1,80);
else
nextword=get_num(opP->con1,0);
if(isvar(opP->con1))
add_fix(s[1],opP->con1,0);
switch(s[1]) {
case 'b':
if(!isbyte(nextword))
opP->error="operand out of range";
addword(nextword);
baseo=0;
break;
case 'w':
case 'z':
#ifdef CHECK_WORD_IMMEDIATES
if(!isword(nextword))
opP->error="operand out of range";
#endif
addword(nextword);
baseo=0;
break;
#ifdef NeXT /* Used in the fmoveml (control) registers */
case 's':
#endif /* NeXT */
case 'l':
addword(nextword>>16);
addword(nextword);
baseo=0;
break;
case 'f':
baseo=2;
outro=8;
break;
case 'F':
baseo=4;
outro=11;
break;
case 'x':
baseo=6;
outro=15;
break;
#ifdef PACKED_IMMEDIATE
/* This does not work. The call to gen_to_words() below does not put out
68k packed decimal format. */
case 'p':
baseo=6;
outro= -1;
break;
#endif
default:
as_fatal("Internal error: Can't decode %c%c",*s,s[1]);
}
if(!baseo)
break;
/* We gotta put out some float */
if(seg(opP->con1)!=SEG_BIG) {
int_to_gen(nextword);
gen_to_words(words,baseo,(long int)outro);
for(wordp=words;baseo--;wordp++)
addword(*wordp);
break;
} /* Its BIG */
if(offs(opP->con1)>0) {
#ifndef NeXT /* fix for bug #8331 */
as_warn("Bignum assumed to be binary bit-pattern");
#endif /* NeXT */
if(offs(opP->con1)>baseo) {
as_warn("Bignum too big for %c format; truncated",s[1]);
offs(opP->con1)=baseo;
}
baseo-=offs(opP->con1);
for(wordp=generic_bignum+offs(opP->con1)-1;offs(opP->con1)--;--wordp)
addword(*wordp);
while(baseo--)
addword(0);
break;
}
gen_to_words(words,baseo,(long int)outro);
for(wordp=words;baseo--;wordp++)
addword(*wordp);
break;
case DREG:
tmpreg=opP->reg-DATA; /* 0.dreg */
break;
case AREG:
tmpreg=0x08+opP->reg-ADDR; /* 1.areg */
break;
case AINDR:
#ifdef NeXT
/* fixes "pc@" operand */
if(opP->reg==PC){
tmpreg=0x3A; /* 7.2 */
addword(0x0000);
}
else
#endif /* NeXT */
tmpreg=0x10+opP->reg-ADDR; /* 2.areg */
break;
case ADEC:
tmpreg=0x20+opP->reg-ADDR; /* 4.areg */
break;
case AINC:
tmpreg=0x18+opP->reg-ADDR; /* 3.areg */
break;
case AOFF:
if(opP->reg==PC)
tmpreg=0x3A; /* 7.2 */
else
tmpreg=0x28+opP->reg-ADDR; /* 5.areg */
nextword=get_num(opP->con1,80);
/* Force into index mode. Hope this works */
if(!issword(nextword)) {
if(opP->reg==PC)
tmpreg=0x3B; /* 7.3 */
else
tmpreg=0x30+opP->reg-ADDR; /* 6.areg */
/* addword(0x0171); */
/* 171 seems to be wrong, and I can't find the 68020 manual, so we'll try 170
(which is what the Sun asm seems to generate */
addword(0x0170);
if(isvar(opP->con1))
add_fix('l',opP->con1,0);
addword(nextword>>16);
/* addword(nextword); */
} else if(isvar(opP->con1)) {
if(!flagseen['l'] &&
flagseen['k'] &&
seg(opP->con1) != SEG_DIFFSECT)
{
add_fix('w',opP->con1,0);
} else {
if(opP->reg==PC)
tmpreg=0x3B; /* 7.3 */
else
tmpreg=0x30+opP->reg-ADDR;
addword(0x0170);
/*
* If this is a pc register with
* a SEGDIFF where the -symbol
* is "." adjust the value of
* of "." to include the two
* bytes of opcode.
*/
if(opP->reg==PC &&
seg(opP->con1) ==
SEG_DIFFSECT &&
opP->con1->
e_exp.X_subtract_symbol->
sy_frag == frag_now &&
strcmp(opP->con1->
e_exp.X_subtract_symbol->
sy_nlist.n_un.n_name,
"L0\001") == 0)
opP->con1->
e_exp.X_subtract_symbol->
sy_nlist.n_value += 2;
add_fix('l',opP->con1,0);
addword(nextword>>16);
}
}
addword(nextword);
break;
case AINDX:
case APODX:
case AMIND:
case APRDX:
nextword=0;
baseo=get_num(opP->con1,80);
outro=get_num(opP->con2,80);
/* Figure out the 'addressing mode' */
/* Also turn on the BASE_DISABLE bit, if needed */
if(opP->reg==PC || opP->reg==ZPC) {
tmpreg=0x3b; /* 7.3 */
if(opP->reg==ZPC)
nextword|=0x80;
} else if(opP->reg==FAIL) {
nextword|=0x80;
tmpreg=0x30; /* 6.garbage */
} else tmpreg=0x30+opP->reg-ADDR; /* 6.areg */
siz1= (opP->con1) ? opP->con1->e_siz : 0;
siz2= (opP->con2) ? opP->con2->e_siz : 0;
/* Index register stuff */
if(opP->ireg>=DATA+0 && opP->ireg<=ADDR+7) {
nextword|=(opP->ireg-DATA)<<12;
if(opP->isiz==0 || opP->isiz==3)
nextword|=0x800;
switch(opP->imul) {
case 1: break;
case 2: nextword|=0x200; break;
case 4: nextword|=0x400; break;
case 8: nextword|=0x600; break;
default: abort();
}
/* IF its simple, GET US OUT OF HERE! */
/* Must be INDEX, with an index register. Address register
cannot be ZERO-PC, and either :b was forced, or we know it'll fit */
if(opP->mode==AINDX &&
opP->reg!=FAIL && opP->reg!=ZPC && (siz1==1 || (issbyte(baseo) &&
!isvar(opP->con1)))) {
nextword +=baseo&0xff;
addword(nextword);
if(isvar(opP->con1))
add_fix('B',opP->con1,0);
break;
}
} else
nextword|=0x40; /* No index reg */
/* It aint simple */
nextword|=0x100;
/* If the guy specified a width, we assume that
it is wide enough. Maybe it isn't. Ifso, we lose
*/
switch(siz1) {
case 0:
if(isvar(opP->con1) || !issword(baseo)) {
siz1=3;
nextword|=0x30;
} else if(baseo==0)
nextword|=0x10;
else {
nextword|=0x20;
siz1=2;
}
break;
case 1:
as_warn("Byte dispacement won't work. Defaulting to :w");
case 2:
nextword|=0x20;
break;
case 3:
nextword|=0x30;
break;
}
/* Figure out innner displacement stuff */
if(opP->mode!=AINDX) {
switch(siz2) {
case 0:
if(isvar(opP->con2) || !issword(outro)) {
siz2=3;
nextword|=0x3;
} else if(outro==0)
nextword|=0x1;
else {
nextword|=0x2;
siz2=2;
}
break;
case 1:
as_warn("Byte dispacement won't work. Defaulting to :w");
case 2:
nextword|=0x2;
break;
case 3:
nextword|=0x3;
break;
}
if(opP->mode==APODX) nextword|=0x04;
else if(opP->mode==AMIND) nextword|=0x40;
}
addword(nextword);
if(isvar(opP->con1))
add_fix(siz1==3 ? 'l' : 'w',opP->con1,0);
if(siz1==3)
addword(baseo>>16);
if(siz1)
addword(baseo);
if(isvar(opP->con2))
add_fix(siz2==3 ? 'l' : 'w',opP->con2,0);
if(siz2==3)
addword(outro>>16);
if(siz2)
addword(outro);
break;
case ABSL:
nextword=get_num(opP->con1,80);
switch(opP->con1->e_siz) {
case 1: /* treat like not there, fall through */
as_warn("ignoring :b suffix on %*s",
(int)(opP->con1->e_end-opP->con1->e_beg),
opP->con1->e_beg);
case 0:
if(!isvar(opP->con1) &&
issword(offs(opP->con1))) {
tmpreg=0x38; /* 7.0 */
addword(nextword);
break;
}
/* Don't generate pc relative code
on 68010 and 68000 */
if(isvar(opP->con1) &&
!subs(opP->con1) &&
seg(opP->con1) == SEG_SECT &&
frchain_now->frch_nsect ==
opP->con1->e_exp.X_add_symbol->
sy_nlist.n_sect &&
flagseen['m'] == 0 &&
!index("~%&$?", s[0])) {
tmpreg=0x3A; /* 7.2 */
add_frag(adds(opP->con1),
offs(opP->con1),
TAB(PCREL,SZ_UNDEF));
break;
}
case 3: /* Fall through into long */
if(isvar(opP->con1))
add_fix('l',opP->con1,0);
tmpreg=0x39; /* 7.1 mode */
addword(nextword>>16);
addword(nextword);
break;
case 2: /* Word */
if(isvar(opP->con1))
add_fix('w',opP->con1,0);
tmpreg=0x38; /* 7.0 mode */
addword(nextword);
break;
}
break;
case MSCR:
default:
as_bad("unknown/incorrect operand");
/* abort(); */
}
install_gen_operand(s[1],tmpreg);
break;
case '#':
case '^':
switch(s[1]) { /* JF: I hate floating point! */
case 'j':
tmpreg=70;
break;
case '8':
tmpreg=20;
break;
case 'C':
tmpreg=50;
break;
case '3':
default:
tmpreg=80;
break;
}
tmpreg=get_num(opP->con1,tmpreg);
if(isvar(opP->con1))
add_fix(s[1],opP->con1,0);
switch(s[1]) {
case 'b': /* Danger: These do no check for
certain types of overflow.
user beware! */
if(!isbyte(tmpreg))
opP->error="out of range";
insop(tmpreg);
if(isvar(opP->con1))
the_ins.reloc[the_ins.nrel-1].n=(opcode->m_codenum)*2;
break;
#ifdef NeXT
case 'j':
if(tmpreg < 0 || tmpreg > 0xfff)
opP->error="out of range";
tmpreg&=0xFFF;
install_operand(s[1],tmpreg);
break;
#endif /* NeXT */
case 'w':
case 'z':
#ifdef CHECK_WORD_IMMEDIATES
if(!isword(tmpreg))
opP->error="out of range";
#endif
insop(tmpreg);
if(isvar(opP->con1))
the_ins.reloc[the_ins.nrel-1].n=(opcode->m_codenum)*2;
break;
case 'l':
insop(tmpreg); /* Because of the way insop works, we put these two out backwards */
insop(tmpreg>>16);
if(isvar(opP->con1))
the_ins.reloc[the_ins.nrel-1].n=(opcode->m_codenum)*2;
break;
case '3':
tmpreg&=0xFF;
#ifdef NeXT
if (isvar(opP->con1))
the_ins.reloc[the_ins.nrel-1].n =
(opcode->m_codenum) + 1;
#endif /* NeXT */
case '8':
case 'C':
install_operand(s[1],tmpreg);
break;
default:
as_fatal("Internal error: Unknown mode #%c",s[1]);
}
break;
case '+':
case '-':
case 'A':
install_operand(s[1],opP->reg-ADDR);
break;
case 'B':
tmpreg = get_num(opP->con1, 80);
switch(s[1]){
case 'g':
/* Deal with fixed size stuff by hand */
if(opP->con1->e_siz){
switch(opP->con1->e_siz){
case 1:
add_fix('B', opP->con1, 1);
break;
case 2:
if(strncmp(instring, "jbsr", 4) == 0){
if(isvar(opP->con1))
add_fix('w', opP->con1, 0);
/* force a jsr 7.0 mode (xxx):W */
the_ins.opcode[the_ins.numo-1] = 0x4eb8;
addword(tmpreg);
break;
}
if(strncmp(instring, "jra", 3) == 0){
if(isvar(opP->con1))
add_fix('w', opP->con1, 0);
/* force a jmp 7.0 mode (xxx):W */
the_ins.opcode[the_ins.numo-1] = 0x4ef8;
addword(tmpreg);
break;
}
opP->con1->e_exp.X_add_number += 2;
add_fix('w', opP->con1, 1);
addword(0);
break;
case 3:
the_ins.opcode[the_ins.numo-1] |= 0xff;
opP->con1->e_exp.X_add_number += 4;
add_fix('l', opP->con1, 1);
addword(0);
addword(0);
break;
default:
as_fatal("Bad size for expression %d",
opP->con1->e_siz);
}
}
else if(subs(opP->con1)){
/* We can't relax it */
the_ins.opcode[the_ins.numo-1] |= 0xff;
add_fix('l', opP->con1, 1);
addword(0);
addword(0);
}
else if(adds(opP->con1)){
if(flagseen['m'] &&
(the_ins.opcode[0] >= 0x6200) &&
(the_ins.opcode[0] <= 0x6f00)){
add_frag(adds(opP->con1),
offs(opP->con1),
TAB(BCC68000, SZ_UNDEF));
}
else{
add_frag(adds(opP->con1),
offs(opP->con1),
TAB(BRANCH, SZ_UNDEF));
}
}
else{
the_ins.opcode[the_ins.numo-1] |= 0xff;
opP->con1->e_exp.X_add_number += 4;
add_fix('l', opP->con1, 1);
addword(0);
addword(0);
}
break;
case 'w':
if(isvar(opP->con1)){
/* check for DBcc instruction */
if((the_ins.opcode[0] & 0xf0f8) ==0x50c8){
/* size varies if patch */
/* needed for long form */
add_frag(adds(opP->con1),
offs(opP->con1),
TAB(DBCC, SZ_UNDEF));
break;
}
}
opP->con1->e_exp.X_add_number += 2;
add_fix('w', opP->con1, 1);
addword(0);
break;
case 'c':
if(opP->con1->e_siz){
switch(opP->con1->e_siz){
case 2:
opP->con1->e_exp.X_add_number += 2;
add_fix('w', opP->con1, 1);
addword(0);
break;
case 3:
the_ins.opcode[the_ins.numo-1] |= 0x40;
opP->con1->e_exp.X_add_number += 4;
add_fix('l', opP->con1, 1);
addword(0);
addword(0);
break;
default:
as_bad("Bad size for offset, must be word "
"or long");
break;
}
}
else if(subs(opP->con1)){
/* We can't relax it */
the_ins.opcode[the_ins.numo-1] |= 0x40;
add_fix('l', opP->con1, 1);
addword(0);
addword(0);
}
else if(adds(opP->con1)){
add_frag(adds(opP->con1),
offs(opP->con1),
TAB(FBRANCH, SZ_UNDEF));
}
else{
the_ins.opcode[the_ins.numo-1] |= 0x40;
opP->con1->e_exp.X_add_number += 4;
add_fix('l', opP->con1, 1);
addword(0);
addword(0);
}
break;
default:
as_fatal("Internal error: operand type B%c unknown",
s[1]);
}
break;
case 'C': /* Ignore it */
break;
case 'd': /* JF this is a kludge */
if(opP->mode==AOFF) {
install_operand('s',opP->reg-ADDR);
} else {
char *tmpP;
tmpP=opP->con1->e_end-2;
opP->con1->e_beg++;
opP->con1->e_end-=4; /* point to the , */
baseo=m68k_reg_parse(&tmpP);
if(baseo<ADDR+0 || baseo>ADDR+7) {
as_bad("Unknown address reg, using A0");
baseo=0;
} else baseo-=ADDR;
install_operand('s',baseo);
}
tmpreg=get_num(opP->con1,80);
if(!issword(tmpreg)) {
as_warn("Expression out of range, using 0");
tmpreg=0;
}
addword(tmpreg);
break;
case 'D':
install_operand(s[1],opP->reg-DATA);
break;
case 'F':
install_operand(s[1],opP->reg-FPREG);
break;
case 'I':
tmpreg=1+opP->reg-COPNUM;
if(tmpreg==8)
tmpreg=0;
install_operand(s[1],tmpreg);
break;
case 'J': /* JF foo */
switch(opP->reg) {
case SFC:
tmpreg=0;
break;
case DFC:
tmpreg=0x001;
break;
case CACR:
tmpreg=0x002;
break;
case USP:
tmpreg=0x800;
break;
case VBR:
tmpreg=0x801;
break;
case CAAR:
tmpreg=0x802;
break;
case MSP:
tmpreg=0x803;
break;
case ISP:
tmpreg=0x804;
break;
#ifdef BUILTIN_MMUS
case TC:
tmpreg=0x003;
break;
case ITT0:
tmpreg=0x004;
break;
case ITT1:
tmpreg=0x005;
break;
case DTT0:
tmpreg=0x006;
break;
case DTT1:
tmpreg=0x007;
break;
case MMUSR:
tmpreg=0x805;
break;
case URP:
tmpreg=0x806;
break;
case SRP:
tmpreg=0x807;
break;
#endif /* BUILTIN_MMUS */
default:
abort();
}
install_operand(s[1],tmpreg);
break;
#ifdef NeXT
case '0':
tmpreg=opP->reg-ADDR;
install_operand(s[1],tmpreg);
break;
#endif /* NeXT */
case 'k':
tmpreg=get_num(opP->con1,55);
install_operand(s[1],tmpreg&0x7f);
break;
case 'l':
tmpreg=opP->reg;
if(s[1]=='w') {
if(tmpreg&0x7FF0000)
as_bad("Floating point register in register list");
insop(reverse_16_bits(tmpreg));
} else {
if(tmpreg&0x700FFFF)
as_bad("Wrong register in floating-point reglist");
install_operand(s[1],reverse_8_bits(tmpreg>>16));
}
break;
case 'L':
tmpreg=opP->reg;
if(s[1]=='w') {
if(tmpreg&0x7FF0000)
as_bad("Floating point register in register list");
insop(tmpreg);
} else if(s[1]=='8') {
if(tmpreg&0x0FFFFFF)
as_bad("incorrect register in reglist");
install_operand(s[1],tmpreg>>24);
} else {
if(tmpreg&0x700FFFF)
as_bad("wrong register in floating-point reglist");
else
install_operand(s[1],tmpreg>>16);
}
break;
case 'M':
install_operand(s[1],get_num(opP->con1,60));
break;
case 'O':
tmpreg= (opP->mode==DREG)
? 0x20+opP->reg-DATA
: (get_num(opP->con1,40)&0x1F);
install_operand(s[1],tmpreg);
break;
case 'Q':
tmpreg=get_num(opP->con1,10);
if(tmpreg==8)
tmpreg=0;
install_operand(s[1],tmpreg);
break;
case 'R':
/* This depends on the fact that ADDR registers are
eight more than their corresponding DATA regs, so
the result will have the ADDR_REG bit set */
install_operand(s[1],opP->reg-DATA);
break;
case 's':
if(opP->reg==FPI) tmpreg=0x1;
else if(opP->reg==FPS) tmpreg=0x2;
else if(opP->reg==FPC) tmpreg=0x4;
else abort();
install_operand(s[1],tmpreg);
break;
case 'S': /* Ignore it */
break;
case 'T':
install_operand(s[1],get_num(opP->con1,30));
break;
case 'U': /* Ignore it */
break;
#if defined(m68851) || defined(BUILTIN_MMUS)
/* JF: These are out of order, I fear. */
case 'f':
switch (opP->reg) {
case SFC:
tmpreg=0;
break;
case DFC:
tmpreg=1;
break;
default:
abort();
}
install_operand(s[1],tmpreg);
break;
#endif
#ifdef BUILTIN_MMUS
case 'a':
switch (opP->reg) {
case SRP:
tmpreg=2;
break;
case CRP:
tmpreg=3;
break;
case TC:
tmpreg=0;
break;
default:
abort();
}
install_operand(s[1],tmpreg);
break;
case 'b':
switch (opP->reg) {
case MMUSR:
tmpreg=0;
break;
default:
abort();
}
install_operand(s[1],tmpreg);
break;
case 'c':
switch (opP->reg) {
case IC:
tmpreg=2;
break;
case DC:
tmpreg=1;
break;
case BC:
tmpreg=3;
break;
default:
abort();
}
install_operand(s[1],tmpreg);
break;
case 'e':
switch (opP->reg) {
case TT0:
tmpreg=2;
break;
case TT1:
tmpreg=3;
break;
default:
abort();
}
install_operand(s[1],tmpreg);
break;
#endif
#ifdef m68851
case 'P':
switch(opP->reg) {
case TC:
tmpreg=0;
break;
case CAL:
tmpreg=4;
break;
case VAL:
tmpreg=5;
break;
case SCC:
tmpreg=6;
break;
case AC:
tmpreg=7;
break;
default:
abort();
}
install_operand(s[1],tmpreg);
break;
case 'V':
if (opP->reg == VAL)
break;
abort();
case 'W':
switch(opP->reg) {
case DRP:
tmpreg=1;
break;
case SRP:
tmpreg=2;
break;
case CRP:
tmpreg=3;
break;
default:
abort();
}
install_operand(s[1],tmpreg);
break;
case 'X':
switch (opP->reg) {
case BAD: case BAD+1: case BAD+2: case BAD+3:
case BAD+4: case BAD+5: case BAD+6: case BAD+7:
tmpreg = (4 << 10) | ((opP->reg - BAD) << 2);
break;
case BAC: case BAC+1: case BAC+2: case BAC+3:
case BAC+4: case BAC+5: case BAC+6: case BAC+7:
tmpreg = (5 << 10) | ((opP->reg - BAC) << 2);
break;
default:
abort();
}
install_operand(s[1], tmpreg);
break;
case 'Y':
if (opP->reg == PSR)
break;
abort();
case 'Z':
if (opP->reg == PCSR)
break;
abort();
#endif /* m68851 */
default:
as_fatal("Internal error: Operand type %c unknown",s[0]);
}
}
/* By the time whe get here (FINALLY) the_ins contains the complete
instruction, ready to be emitted. . . */
}
static
int
get_regs(
int i,
struct m68k_op *opP,
char *str)
{
/* 26, 25, 24, 23-16, 15-8, 0-7 */
/* Low order 24 bits encoded fpc,fps,fpi,fp7-fp0,a7-a0,d7-d0 */
unsigned long int cur_regs = 0;
int reg1,
reg2;
#define ADD_REG(x) { if(x==FPI) cur_regs|=(1<<24);\
else if(x==FPS) cur_regs|=(1<<25);\
else if(x==FPC) cur_regs|=(1<<26);\
else cur_regs|=(1<<(x-1)); }
reg1=i;
for(;;) {
if(*str=='/') {
ADD_REG(reg1);
str++;
} else if(*str=='-') {
str++;
reg2=m68k_reg_parse(&str);
if(reg2<DATA || reg2>=FPREG+8 || reg1==FPI || reg1==FPS || reg1==FPC) {
opP->error="unknown register in register list";
return FAIL;
}
while(reg1<=reg2) {
ADD_REG(reg1);
reg1++;
}
if(*str=='\0')
break;
} else if(*str=='\0') {
ADD_REG(reg1);
break;
} else {
opP->error="unknow character in register list";
return FAIL;
}
/* DJA -- Bug Fix. Did't handle d1-d2/a1 until the following instruction was added */
if (*str=='/')
str ++;
reg1=m68k_reg_parse(&str);
if((reg1<DATA || reg1>=FPREG+8) && !(reg1==FPI || reg1==FPS || reg1==FPC)) {
opP->error="unknown register in register list";
return FAIL;
}
}
opP->reg=cur_regs;
return OK;
}
static
int
reverse_16_bits(
int in)
{
int out=0;
int n;
static int mask[16] = {
0x0001,0x0002,0x0004,0x0008,0x0010,0x0020,0x0040,0x0080,
0x0100,0x0200,0x0400,0x0800,0x1000,0x2000,0x4000,0x8000
};
for(n=0;n<16;n++) {
if(in&mask[n])
out|=mask[15-n];
}
return out;
}
static
int
reverse_8_bits(
int in)
{
int out=0;
int n;
static int mask[8] = {
0x0001,0x0002,0x0004,0x0008,0x0010,0x0020,0x0040,0x0080,
};
for(n=0;n<8;n++) {
if(in&mask[n])
out|=mask[7-n];
}
return out;
}
static
void
install_operand(
int mode,
int val)
{
switch(mode) {
case 's':
the_ins.opcode[0]|=val & 0xFF; /* JF FF is for M kludge */
break;
case 'd':
the_ins.opcode[0]|=val<<9;
break;
case '1':
the_ins.opcode[1]|=val<<12;
break;
case '2':
the_ins.opcode[1]|=val<<6;
break;
case '3':
the_ins.opcode[1]|=val;
break;
case '4':
the_ins.opcode[2]|=val<<12;
break;
case '5':
the_ins.opcode[2]|=val<<6;
break;
case '6':
/* DANGER! This is a hack to force cas2l and cas2w cmds
to be three words long! */
the_ins.numo++;
the_ins.opcode[2]|=val;
break;
case '7':
the_ins.opcode[1]|=val<<7;
break;
case '8':
the_ins.opcode[1]|=val<<10;
break;
#if defined(m68851) || defined(BUILTIN_MMUS)
case '9':
the_ins.opcode[1]|=val<<5;
break;
#endif
#ifdef BUILTIN_MMUS
case 'S':
the_ins.opcode[0]|=val<<6;
break;
#endif
case 't':
the_ins.opcode[1]|=(val<<10)|(val<<7);
break;
case 'D':
the_ins.opcode[1]|=(val<<12)|val;
break;
case 'g':
the_ins.opcode[0]|=val=0xff;
break;
case 'i':
the_ins.opcode[0]|=val<<9;
break;
case 'C':
the_ins.opcode[1]|=val;
break;
case 'j':
the_ins.opcode[1]|=val;
the_ins.numo++; /* What a hack */
break;
case 'k':
the_ins.opcode[1]|=val<<4;
break;
case 'b':
case 'w':
case 'l':
break;
case 'c':
default:
abort();
}
}
static
void
install_gen_operand(
int mode,
int val)
{
switch(mode) {
case 's':
the_ins.opcode[0]|=val;
break;
case 'd':
/* This is a kludge!!! */
the_ins.opcode[0]|=(val&0x07)<<9|(val&0x38)<<3;
break;
case 'b':
case 'w':
case 'l':
case 'f':
case 'F':
case 'x':
case 'p':
the_ins.opcode[0]|=val;
break;
/* more stuff goes here */
default:
abort();
}
}
static
char *
crack_operand(
char *str,
struct m68k_op *opP)
{
register int parens;
register int c;
register char *beg_str;
if(!str) {
return str;
}
beg_str=str;
for(parens=0;*str && (parens>0 || notend(str));str++) {
if(*str == '"') {
str++;
while(*str && *str != '"')
str++;
if(*str != '"'){ /* ERROR */
opP->error="Missing \"";
return str;
}
}
else{
if(*str=='(')
parens++;
else if(*str==')') {
if(!parens) { /* ERROR */
opP->error="Extra )";
return str;
}
--parens;
}
}
}
if(!*str && parens) { /* ERROR */
opP->error="Missing )";
return str;
}
c= *str;
*str='\0';
if(m68k_ip_op(beg_str,opP)==FAIL) {
*str=c;
return str;
}
*str=c;
if(c=='}')
c= *++str; /* JF bitfield hack */
if(c) {
c= *++str;
if(!c)
as_bad("Missing operand");
}
return str;
}
/* See the comment up above where the #define notend(... is */
#if 0
notend(s)
char *s;
{
if(*s==',') return 0;
if(*s=='{' || *s=='}')
return 0;
if(*s!=':') return 1;
/* This kludge here is for the division cmd, which is a kludge */
if(index("aAdD#",s[1])) return 0;
return 1;
}
#endif /* 0 */
#ifdef NeXT
static char *file_030, *file_040;
static unsigned long line_030, line_040;
#endif /* NeXT */
/* This is the guts of the machine-dependent assembler. STR points to a
machine dependent instruction. This funciton is supposed to emit
the frags/bytes it assembles to.
*/
void
md_assemble(
char *str)
{
char *er;
short *fromP;
char *toP = NULL;
int m,n;
char *to_beg_P;
int shorts_this_frag;
memset((char *)(&the_ins), '\0', sizeof(the_ins));
m68_ip(str);
er=the_ins.error;
if(!er) {
for(n=the_ins.numargs;n;--n)
if(the_ins.operands[n].error) {
er=the_ins.operands[n].error;
break;
}
}
if(er) {
as_bad("\"%s\" -- Statement '%s' ignored",er,str);
return;
}
#ifdef NeXT
if(the_ins.cpus != NULL && !force_cpusubtype_ALL){
if(md_cpusubtype == CPU_SUBTYPE_MC680x0_ALL){
switch(*the_ins.cpus){
case '2':
as_bad("implementation specific instruction for the MC68020"
" and -force_cpusubtype_ALL not specified");
break;
case '3':
if(archflag_cpusubtype == CPU_SUBTYPE_MC68040)
as_bad("030 instruction not allowed with -arch m68040");
else{
file_030 = logical_input_file ?
logical_input_file : physical_input_file;
line_030 = logical_input_line ?
logical_input_line : physical_input_line;
md_cpusubtype = CPU_SUBTYPE_MC68030_ONLY;
}
break;
case '4':
if(archflag_cpusubtype == CPU_SUBTYPE_MC68030_ONLY)
as_bad("040 instruction not allowed with -arch m68030");
else{
file_040 = logical_input_file ?
logical_input_file : physical_input_file;
line_040 = logical_input_line ?
logical_input_line : physical_input_line;
md_cpusubtype = CPU_SUBTYPE_MC68040;
}
break;
}
}
else{
switch(*the_ins.cpus){
case '2':
as_bad("implementation specific instruction for the MC68020"
" and -force_cpusubtype_ALL not specified");
break;
case '3':
if(archflag_cpusubtype == CPU_SUBTYPE_MC68040)
as_bad("030 instruction not allowed with -arch m68040");
else{
if(md_cpusubtype != CPU_SUBTYPE_MC680x0_ALL &&
md_cpusubtype != CPU_SUBTYPE_MC68030_ONLY)
as_bad("more than one implementation specific "
"instruction seen and -force_cpusubtype_ALL "
" not specified (first 040 instruction in: "
"%s at line %lu)", file_040, line_040);
md_cpusubtype = CPU_SUBTYPE_MC68030_ONLY;
}
break;
case '4':
if(archflag_cpusubtype == CPU_SUBTYPE_MC68030_ONLY)
as_bad("040 instruction not allowed with -arch m68030");
else{
if(md_cpusubtype != CPU_SUBTYPE_MC680x0_ALL &&
md_cpusubtype != CPU_SUBTYPE_MC68040)
as_bad("more than one implementation specific "
"instruction seen and -force_cpusubtype_ALL "
"not specified (first 030 instruction in: "
"%s at line %lu)", file_030, line_030);
md_cpusubtype = CPU_SUBTYPE_MC68040;
}
break;
}
}
}
#endif /* NeXT */
#ifdef NeXT /* generate stabs for debugging assembly code */
/*
* If the -g flag is present generate a line number stab for the
* instruction.
*
* See the detailed comments about stabs in read_a_source_file() for a
* description of what is going on here.
*/
if(flagseen['g'] && frchain_now->frch_nsect == text_nsect){
(void)symbol_new(
"",
68 /* N_SLINE */,
text_nsect,
logical_input_line /* n_desc, line number */,
obstack_next_free(&frags) - frag_now->fr_literal,
frag_now);
}
#endif /* NeXT */
if(the_ins.nfrag==0) { /* No frag hacking involved; just put it out */
toP=frag_more(2*the_ins.numo);
fromP= &the_ins.opcode[0];
for(m=the_ins.numo;m;--m) {
md_number_to_chars(toP,(long)(*fromP),2);
toP+=2;
fromP++;
}
/* put out symbol-dependent info */
for(m=0;m<the_ins.nrel;m++) {
switch(the_ins.reloc[m].wid) {
case 'B':
n=1;
break;
case 'b':
n=1;
break;
case '3':
#ifdef NeXT
/* This is a bug fix that is not in the 1.36
* version of GAS for this construct:
* fmovemx #foo,a0@-
* foo = 0xffff;
* Where the width of the relocation should be
* one byte (the low 8 bits of the second word)
* for the floating point register mask. Other- * wise the next byte after this instruction
* gets trashed by this relocation.
*/
n=1;
#else /* !defined(NeXT) */
n=2;
#endif /* NeXT */
break;
case 'w':
n=2;
break;
case 'l':
n=4;
break;
default:
as_fatal("Don't know how to figure width of %c in md_assemble()",the_ins.reloc[m].wid);
}
fix_new(frag_now,
(toP - frag_now->fr_literal) -
the_ins.numo * 2 + the_ins.reloc[m].n,
n,
the_ins.reloc[m].add,
the_ins.reloc[m].sub,
the_ins.reloc[m].off,
the_ins.reloc[m].pcrel,
0,0);
}
return;
}
/* There's some frag hacking */
for(n=0,fromP= &the_ins.opcode[0];n<the_ins.nfrag;n++) {
int wid;
if(n==0) wid=2*the_ins.fragb[n].fragoff;
else wid=2*(the_ins.numo-the_ins.fragb[n-1].fragoff);
toP=frag_more(wid);
to_beg_P=toP;
shorts_this_frag=0;
for(m=wid/2;m;--m) {
md_number_to_chars(toP,(long)(*fromP),2);
toP+=2;
fromP++;
shorts_this_frag++;
}
for(m=0;m<the_ins.nrel;m++) {
if((the_ins.reloc[m].n)>= 2*shorts_this_frag /* 2*the_ins.fragb[n].fragoff */) {
the_ins.reloc[m].n-= 2*shorts_this_frag /* 2*the_ins.fragb[n].fragoff */;
break;
}
wid=the_ins.reloc[m].wid;
if(wid==0)
continue;
the_ins.reloc[m].wid=0;
wid = (wid=='b') ? 1 : (wid=='w') ? 2 : (wid=='l') ? 4 : 4000;
fix_new(frag_now,
(toP - frag_now->fr_literal) -
the_ins.numo * 2 + the_ins.reloc[m].n,
wid,
the_ins.reloc[m].add,
the_ins.reloc[m].sub,
the_ins.reloc[m].off,
the_ins.reloc[m].pcrel,
0,0);
}
know(the_ins.fragb[n].fadd);
(void)frag_var(rs_machine_dependent,10,0,(relax_substateT)(the_ins.fragb[n].fragty),
the_ins.fragb[n].fadd,the_ins.fragb[n].foff,to_beg_P);
}
n=(the_ins.numo-the_ins.fragb[n-1].fragoff);
shorts_this_frag=0;
if(n) {
toP=frag_more(n*sizeof(short));
while(n--) {
md_number_to_chars(toP,(long)(*fromP),2);
toP+=2;
fromP++;
shorts_this_frag++;
}
}
for(m=0;m<the_ins.nrel;m++) {
int wid;
wid=the_ins.reloc[m].wid;
if(wid==0)
continue;
the_ins.reloc[m].wid=0;
wid = (wid=='b') ? 1 : (wid=='w') ? 2 : (wid=='l') ? 4 : 4000;
fix_new(frag_now,
(the_ins.reloc[m].n + toP-frag_now->fr_literal) -
/* the_ins.numo */ shorts_this_frag * 2,
wid,
the_ins.reloc[m].add,
the_ins.reloc[m].sub,
the_ins.reloc[m].off,
the_ins.reloc[m].pcrel,
0,0);
}
}
/* This function is called once, at assembler startup time. This should
set up all the tables, etc that the MD part of the assembler needs
*/
void
md_begin(
void)
{
/*
* md_begin -- set up hash tables with 68000 instructions.
* similar to what the vax assembler does. ---phr
*/
/* RMS claims the thing to do is take the m68k-opcode.h table, and make
a copy of it at runtime, adding in the information we want but isn't
there. I think it'd be better to have an awk script hack the table
at compile time. Or even just xstr the table and use it as-is. But
my lord ghod hath spoken, so we do it this way. Excuse the ugly var
names. */
register struct m68k_opcode *ins;
register struct m68_incant *hack,
*slak;
register char *retval = 0; /* empty string, or error msg text */
register int i;
register char c;
if ((op_hash = hash_new()) == NULL)
as_fatal("Virtual memory exhausted");
obstack_begin(&robyn,4000);
for (ins = (struct m68k_opcode *)m68k_opcodes; ins < endop; ins++) {
hack=slak=(struct m68_incant *)obstack_alloc(&robyn,sizeof(struct m68_incant));
do {
slak->m_operands=ins->args;
slak->m_opnum=strlen(slak->m_operands)/2;
slak->m_opcode=ins->opcode;
/* This is kludgey */
slak->m_codenum=((ins->match)&0xffffL) ? 2 : 1;
#ifdef NeXT
slak->m_cpus = ins->cpus;
#endif /* NeXT */
if((ins+1)!=endop && !strcmp(ins->name,(ins+1)->name)) {
slak->m_next=(struct m68_incant *)
obstack_alloc(&robyn,sizeof(struct m68_incant));
ins++;
} else
slak->m_next=0;
slak=slak->m_next;
} while(slak);
retval = hash_insert (op_hash, ins->name,(char *)hack);
/* Didn't his mommy tell him about null pointers? */
if(retval && *retval)
as_fatal("Internal Error: Can't hash %s: %s",ins->name,retval);
}
for (i = 0; i < sizeof(mklower_table) ; i++)
mklower_table[i] = (isupper(c = (char) i)) ? tolower(c) : c;
for (i = 0 ; i < sizeof(notend_table) ; i++) {
notend_table[i] = 0;
alt_notend_table[i] = 0;
}
notend_table[','] = 1;
notend_table['{'] = 1;
notend_table['}'] = 1;
alt_notend_table['a'] = 1;
alt_notend_table['A'] = 1;
alt_notend_table['d'] = 1;
alt_notend_table['D'] = 1;
alt_notend_table['#'] = 1;
alt_notend_table['f'] = 1;
alt_notend_table['F'] = 1;
}
#if 0
#define notend(s) ((*s == ',' || *s == '}' || *s == '{' \
|| (*s == ':' && index("aAdD#", s[1]))) \
? 0 : 1)
#endif
/* This funciton is called once, before the assembler exits. It is
supposed to do any final cleanup for this part of the assembler.
*/
void
md_end(
void)
{
}
/* Equal to MAX_PRECISION in atof-ieee.c */
#define MAX_LITTLENUMS 6
/* Turn a string in input_line_pointer into a floating point constant of type
type, and store the appropriate bytes in *litP. The number of LITTLENUMS
emitted is stored in *sizeP . An error message is returned, or NULL on OK.
*/
char *
md_atof(
int type,
char *litP,
int *sizeP)
{
int prec;
LITTLENUM_TYPE words[MAX_LITTLENUMS];
LITTLENUM_TYPE *wordP;
char *t;
switch(type) {
case 'f':
case 'F':
case 's':
case 'S':
prec = 2;
break;
case 'd':
case 'D':
case 'r':
case 'R':
prec = 4;
break;
case 'x':
case 'X':
prec = 6;
break;
case 'p':
case 'P':
prec = 6;
break;
default:
*sizeP=0;
return "Bad call to MD_ATOF()";
}
t=atof_ieee(input_line_pointer,type,words);
if(t)
input_line_pointer=t;
*sizeP=prec * sizeof(LITTLENUM_TYPE);
for(wordP=words;prec--;) {
md_number_to_chars(litP,(long)(*wordP++),sizeof(LITTLENUM_TYPE));
litP+=sizeof(LITTLENUM_TYPE);
}
return ""; /* Someone should teach Dean about null pointers */
}
/* Turn an integer of n bytes (in val) into a stream of bytes appropriate
for use in the a.out file, and stores them in the array pointed to by buf.
This knows about the endian-ness of the target machine and does
THE RIGHT THING, whatever it is. Possible values for n are 1 (byte)
2 (short) and 4 (long) Floating numbers are put out as a series of
LITTLENUMS (shorts, here at least)
*/
void
md_number_to_chars(
char *buf,
long val,
int n)
{
switch(n) {
case 1:
*buf++=val;
break;
case 2:
*buf++=(val>>8);
*buf++=val;
break;
case 4:
*buf++=(val>>24);
*buf++=(val>>16);
*buf++=(val>>8);
*buf++=val;
break;
default:
abort();
}
}
void
md_number_to_imm(
unsigned char *buf,
long val,
int n,
fixS *fixP,
int nsect)
{
switch(n) {
case 1:
*buf++=val;
break;
case 2:
*buf++=(val>>8);
*buf++=val;
break;
case 4:
*buf++=(val>>24);
*buf++=(val>>16);
*buf++=(val>>8);
*buf++=val;
break;
default:
abort();
}
}
/*
* Force truly undefined symbols to their maximum size, and generally set up
* the frag list to be relaxed. It is the caller's responsiblity to set the
* current section, frchain_now, to the corresponding nsect specified so that
* calls to fix_new() will make fixes for this section.
*/
int
md_estimate_size_before_relax(
fragS *fragP,
int nsect)
{
int old_fix;
old_fix = fragP->fr_fix;
/*
* Handle SZ_UNDEF first, it can be changed to BYTE or SHORT.
*/
switch(fragP->fr_subtype){
case TAB(DBCC, SZ_UNDEF):
if(fragP->fr_symbol->sy_nlist.n_sect == nsect){
fragP->fr_subtype = TAB(DBCC, SHORT);
fragP->fr_var += 2;
break;
}
/*
* Only DBcc 68000 instructions can come here.
* Change dbcc into dbcc/jmp absl long.
*/
fragP->fr_opcode[2] = 0x00; /* branch offset = 4 */
fragP->fr_opcode[3] = 0x04;
fragP->fr_opcode[4] = 0x60; /* put in bra pc+6 */
fragP->fr_opcode[5] = 0x06;
fragP->fr_opcode[6] = 0x4e; /* put in jmp long (0x4ef9) */
fragP->fr_opcode[7] = 0xf9;
fragP->fr_fix += 6; /* account for bra/jmp instructions */
fix_new(fragP,
fragP->fr_fix,
4,
fragP->fr_symbol,
0,
fragP->fr_offset,
0,
0,
0);
fragP->fr_fix += 4; /* account for jmp instruction displacement */
frag_wane(fragP);
break;
case TAB(BCC68000, SZ_UNDEF):
if(fragP->fr_symbol->sy_nlist.n_sect == nsect){
fragP->fr_subtype = TAB(BCC68000, BYTE);
break;
}
/*
* Only Bcc 68000 instructions can come here.
* Change bcc into b!cc/jmp absl long.
*/
fragP->fr_opcode[0] ^= 0x01; /* invert bcc */
fragP->fr_opcode[1] = 0x6; /* branch offset = 6 */
fragP->fr_opcode[2] = 0x4e; /* put in jmp long (0x4ef9) */
fragP->fr_opcode[3] = 0xf9;
fragP->fr_fix += 2; /* account for jmp instruction */
fix_new(fragP,
fragP->fr_fix,
4,
fragP->fr_symbol,
0,
fragP->fr_offset,
0,
0,
0);
fragP->fr_fix += 4; /* account for jmp instruction displacement */
frag_wane(fragP);
break;
case TAB(BRANCH, SZ_UNDEF):
if(fragP->fr_symbol->sy_nlist.n_sect == nsect){
/*
* The NeXT linker has the ability to scatter blocks of
* sections between labels. This requires that brances to
* labels that survive to the link phase must be able to
* be relocated.
*/
if(fragP->fr_symbol->sy_name[0] != 'L' || flagseen ['L']){
fix_new(fragP,
fragP->fr_fix,
4,
fragP->fr_symbol,
0,
fragP->fr_offset + 4,
1,
1,
0);
fragP->fr_fix += 4;
fragP->fr_opcode[1] = 0xff;
frag_wane(fragP);
break;
}
else
fragP->fr_subtype = TAB(BRANCH, BYTE);
break;
}
else if(flagseen['m']){
if(fragP->fr_opcode[0] == 0x61){
fragP->fr_opcode[0] = 0x4E;
fragP->fr_opcode[1] = 0xB9; /* JBSR with ABSL LONG offset */
fix_new(fragP,
fragP->fr_fix,
4,
fragP->fr_symbol,
0,
fragP->fr_offset,
0,
0,
0);
fragP->fr_fix += 4;
frag_wane(fragP);
}
else if(fragP->fr_opcode[0] == 0x60){
fragP->fr_opcode[0] = 0x4E;
fragP->fr_opcode[1] = 0xF9; /* JMP with ABSL LONG offset */
fix_new(fragP,
fragP->fr_fix,
4,
fragP->fr_symbol,
0,
fragP->fr_offset,
0,
0,
0);
fragP->fr_fix += 4;
frag_wane(fragP);
}
else{
as_warn("Long branch offset to extern symbol not "
"supported.");
}
break;
}
else{
/* Symbol is still undefined. Make it simple */
fix_new(fragP,
fragP->fr_fix,
4,
fragP->fr_symbol,
0,
fragP->fr_offset + 4,
1,
1,
0);
fragP->fr_fix += 4;
fragP->fr_opcode[1] = 0xff;
frag_wane(fragP);
break;
}
break;
case TAB(FBRANCH, SZ_UNDEF):
if(fragP->fr_symbol->sy_nlist.n_sect == nsect){
/*
* The NeXT linker has the ability to scatter blocks of
* sections between labels. This requires that brances to
* labels that survive to the link phase must be able to
* be relocated.
*/
if(fragP->fr_symbol->sy_name[0] != 'L' || flagseen ['L']) {
fix_new(fragP,
fragP->fr_fix,
4,
fragP->fr_symbol,
0,
fragP->fr_offset + 4,
1,
1,
0);
fragP->fr_fix += 4;
fragP->fr_opcode[1] |= 0x40;
frag_wane(fragP);
break;
}
else{
fragP->fr_subtype = TAB(FBRANCH, SHORT);
fragP->fr_var += 2;
}
}
else {
/* Symbol is still undefined. Make it long */
fix_new(fragP,
fragP->fr_fix,
4,
fragP->fr_symbol,
0,
fragP->fr_offset + 4,
1,
1,
0);
fragP->fr_fix += 4;
fragP->fr_opcode[1] |= 0x40;
frag_wane(fragP);
break;
}
break;
case TAB(PCREL, SZ_UNDEF):
if(fragP->fr_symbol->sy_nlist.n_sect == nsect){
/*
* The NeXT linker has the ability to scatter blocks of
* sections between labels. This requires that brances to
* labels that survive to the link phase must be able to
* be relocated.
*/
if(fragP->fr_symbol->sy_name[0] != 'L' || flagseen ['L']) {
/*
* The thing to do here is force it to ABSOLUTE LONG, since
* PCREL is really trying to shorten an ABSOLUTE address
* anyway.
*/
if((fragP->fr_opcode[1] & 0x3F) != 0x3A)
as_bad("Internal error (long PC-relative operand) for "
"insn 0x%04x at 0x%lx", fragP->fr_opcode[0],
fragP->fr_address);
fragP->fr_opcode[1] &= ~0x3F;
fragP->fr_opcode[1] |= 0x39; /* Mode 7.1 */
fix_new(fragP,
fragP->fr_fix,
4,
fragP->fr_symbol,
0,
fragP->fr_offset,
0,
0,
0);
fragP->fr_fix += 4;
frag_wane(fragP);
}
else{
fragP->fr_subtype = TAB(PCREL, SHORT);
fragP->fr_var += 2;
}
}
else {
/* Symbol is still undefined. Make it long */
if((fragP->fr_opcode[1] & 0x3F) != 0x3A)
as_bad("Internal error (long PC-relative operand) for "
"insn 0x%04x at 0x%lx", fragP->fr_opcode[0],
fragP->fr_address);
fragP->fr_opcode[1] &= ~0x3F;
fragP->fr_opcode[1] |= 0x39; /* Mode 7.1 */
fix_new(fragP,
fragP->fr_fix,
4,
fragP->fr_symbol,
0,
fragP->fr_offset,
1,
1,
0);
fragP->fr_fix += 4;
frag_wane(fragP);
break;
}
break;
default:
break;
}
/*
* Now that SZ_UNDEF are taken care of, check others
*/
switch(fragP->fr_subtype) {
case TAB(BCC68000, BYTE):
case TAB(BRANCH, BYTE):
/*
* We can't do a short jump to the next instruction,
* so we force word mode.
*/
if(fragP->fr_symbol != NULL &&
fragP->fr_symbol->sy_value == 0 &&
fragP->fr_symbol->sy_frag == fragP->fr_next) {
fragP->fr_subtype = TAB(TABTYPE(fragP->fr_subtype), SHORT);
fragP->fr_var += 2;
}
break;
default:
break;
}
return(fragP->fr_var + fragP->fr_fix - old_fix);
}
/*
* *fragP has been relaxed to its final size, and now needs to have
* the bytes inside it modified to conform to the new size. There is UGLY
* MAGIC here interms of changing the addressing mode of some instructions
* and using other instructions in place of the original in the case of the
* 68000 and 68010 where long pc-relative forms don't exist.
*/
void
md_convert_frag(
fragS *fragP)
{
long disp;
long ext;
char *buffer_address;
int object_address;
ext = 0;
/* Address in gas core of the place to store the displacement. */
buffer_address = fragP->fr_fix + fragP->fr_literal;
/* Address in object code of the displacement. */
object_address = fragP->fr_fix + fragP->fr_address;
know(fragP->fr_symbol);
/* The displacement of the address, from current location. */
disp = (fragP->fr_symbol->sy_value + fragP->fr_offset) - object_address;
switch(fragP->fr_subtype){
case TAB(BCC68000, BYTE):
case TAB(BRANCH, BYTE):
know(issbyte(disp));
if(disp == 0){
/* Replace this with a nop. */
fragP->fr_opcode[0] = 0x4e;
fragP->fr_opcode[1] = 0x71;
}
else{
fragP->fr_opcode[1] = disp;
}
ext = 0;
break;
case TAB(DBCC, SHORT):
know(issword(disp));
ext=2;
break;
case TAB(BCC68000, SHORT):
case TAB(BRANCH, SHORT):
know(issword(disp));
fragP->fr_opcode[1] = 0x00;
ext = 2;
break;
case TAB(BRANCH,LONG):
if(flagseen['m']){
if(fragP->fr_opcode[0] == 0x61){
fragP->fr_opcode[0] = 0x4E;
fragP->fr_opcode[1] = 0xB9; /* JBSR with ABSL LONG offset */
fix_new(fragP,
fragP->fr_fix,
4,
fragP->fr_symbol,
0,
fragP->fr_offset,
0,
0,
0);
fragP->fr_fix += 4;
ext = 0;
}
else if(fragP->fr_opcode[0] == 0x60){
fragP->fr_opcode[0]= 0x4E;
fragP->fr_opcode[1]= 0xF9; /* JMP with ABSL LONG offset */
fix_new(fragP,
fragP->fr_fix,
4,
fragP->fr_symbol,
0,
fragP->fr_offset,
0,
0,
0);
fragP->fr_fix += 4;
ext = 0;
}
else{
as_bad("Long branch offset not supported.");
}
}
else{
fragP->fr_opcode[1] = 0xff;
ext = 4;
}
break;
case TAB(BCC68000, LONG):
/*
* Only Bcc 68000 instructions can come here.
* Change bcc into b!cc/jmp absl long.
*/
fragP->fr_opcode[0] ^= 0x01; /* invert bcc */
fragP->fr_opcode[1] = 0x6; /* branch offset = 6 */
fragP->fr_opcode[2] = 0x4e; /* put in jmp long (0x4ef9) */
fragP->fr_opcode[3] = 0xf9;
fragP->fr_fix += 2; /* account for jmp instruction */
fix_new(fragP,
fragP->fr_fix,
4,
fragP->fr_symbol,
0,
fragP->fr_offset,
0,
0,
0);
fragP->fr_fix += 4; /* account for jmp instruction's displacement */
ext = 0;
break;
case TAB(DBCC, LONG):
/*
* Only DBcc 68000 instructions can come here.
* Change dbcc into dbcc/jmp absl long.
*/
fragP->fr_opcode[2] = 0x00; /* branch offset = 4 */
fragP->fr_opcode[3] = 0x04;
fragP->fr_opcode[4] = 0x60; /* put in bra pc+6 */
fragP->fr_opcode[5] = 0x06;
fragP->fr_opcode[6] = 0x4e; /* put in jmp long (0x4ef9) */
fragP->fr_opcode[7] = 0xf9;
fragP->fr_fix += 6; /* account for bra/jmp instructions */
fix_new(fragP,
fragP->fr_fix,
4,
fragP->fr_symbol,
0,
fragP->fr_offset,
0,
0,
0);
fragP->fr_fix += 4; /* account for jmp instruction's displacement */
ext = 0;
break;
case TAB(FBRANCH, SHORT):
know((fragP->fr_opcode[1] & 0x40) == 0);
ext = 2;
break;
case TAB(FBRANCH, LONG):
fragP->fr_opcode[1] |= 0x40; /* Turn on LONG bit */
ext = 4;
break;
case TAB(PCREL,SHORT):
ext = 2;
break;
case TAB(PCREL,LONG):
/*
* The thing to do here is force it to ABSOLUTE LONG, since
* PCREL is really trying to shorten an ABSOLUTE address anyway.
*/
if((fragP->fr_opcode[1] & 0x3F) != 0x3A)
as_bad("Internal error (long PC-relative operand) for insn "
"0x%04x at 0x%lx", fragP->fr_opcode[0],
fragP->fr_address);
fragP->fr_opcode[1] &= ~0x3F;
fragP->fr_opcode[1] |= 0x39; /* Mode 7.1 */
fix_new(fragP,
fragP->fr_fix,
4,
fragP->fr_symbol,
0,
fragP->fr_offset,
0,
0,
0);
fragP->fr_fix += 4; /* account for the instruction's displacement */
ext = 0;
break;
default:
break;
}
if(ext != 0){
md_number_to_chars(buffer_address, (long)disp, (int)ext);
fragP->fr_fix += ext;
}
}
/* Different values of OK tell what its OK to return. Things that aren't OK are an error (what a shock, no?)
0: Everything is OK
10: Absolute 1:8 only
20: Absolute 0:7 only
30: absolute 0:15 only
40: Absolute 0:31 only
50: absolute 0:127 only
55: absolute -64:63 only
60: absolute -128:127 only
70: absolute 0:4095 only
80: No bignums
*/
static
int
get_num(
struct m68k_exp *exp,
int ok)
{
#ifdef TEST2
long l = 0;
if(!exp->e_beg)
return 0;
if(*exp->e_beg=='0') {
if(exp->e_beg[1]=='x')
sscanf(exp->e_beg+2,"%x",&l);
else
sscanf(exp->e_beg+1,"%O",&l);
return l;
}
return atol(exp->e_beg);
#else /* !defined(TEST2) */
char *save_in;
char c_save;
if(!exp) {
/* Can't do anything */
return 0;
}
if(!exp->e_beg || !exp->e_end) {
seg(exp)=SEG_ABSOLUTE;
adds(exp)=0;
subs(exp)=0;
offs(exp)= (ok==10) ? 1 : 0;
as_warn("Null expression defaults to %ld",offs(exp));
return 0;
}
exp->e_siz=0;
if(/* ok!=80 && */exp->e_end[-1]==':' && (exp->e_end-exp->e_beg)>=2) {
switch(exp->e_end[0]) {
case 's':
case 'b':
exp->e_siz=1;
break;
case 'w':
exp->e_siz=2;
break;
case 'l':
exp->e_siz=3;
break;
default:
as_bad("Unknown size for expression \"%c\"",exp->e_end[0]);
}
exp->e_end-=2;
}
c_save=exp->e_end[1];
exp->e_end[1]='\0';
save_in=input_line_pointer;
input_line_pointer=exp->e_beg;
#ifdef NeXT /* feature to try to make expressions absolute */
(void) expression (&(exp->e_exp));
/* DJA -- we will try to make an absolute number here */
switch(try_to_make_absolute(&(exp->e_exp))) {
#else /* !defined(NeXT) */
switch(expression(&(exp->e_exp))) {
#endif /* NeXT */
case SEG_NONE:
/* Do the same thing the VAX asm does */
seg(exp)=SEG_ABSOLUTE;
adds(exp)=0;
subs(exp)=0;
offs(exp)=0;
if(ok==10) {
as_warn("expression out of range: defaulting to 1");
offs(exp)=1;
}
break;
case SEG_ABSOLUTE:
switch(ok) {
case 10:
if(offs(exp)<1 || offs(exp)>8) {
as_warn("expression out of range: defaulting to 1");
offs(exp)=1;
}
break;
case 20:
if(offs(exp)<0 || offs(exp)>7)
goto outrange;
break;
case 30:
if(offs(exp)<0 || offs(exp)>15)
goto outrange;
break;
case 40:
if(offs(exp)<0 || offs(exp)>32)
goto outrange;
break;
case 50:
if(offs(exp)<0 || offs(exp)>127)
goto outrange;
break;
case 55:
if(offs(exp)<-64 || offs(exp)>63)
goto outrange;
break;
case 60:
if(offs(exp)<-128 || offs(exp)>127)
goto outrange;
break;
case 70:
if(offs(exp)<0 || offs(exp)>4095) {
outrange:
as_warn("expression out of range: defaulting to 0");
offs(exp)=0;
}
break;
default:
break;
}
break;
case SEG_SECT:
case SEG_UNKNOWN:
case SEG_DIFFSECT:
if(ok>=10 && ok<=70) {
seg(exp)=SEG_ABSOLUTE;
adds(exp)=0;
subs(exp)=0;
offs(exp)= (ok==10) ? 1 : 0;
as_warn("Can't deal with expression \"%s\": defaulting to %ld",exp->e_beg,offs(exp));
}
break;
case SEG_BIG:
#ifndef NeXT /* fix for bug #8331 */ /* This hack is already done by expr */
if(ok==80 && offs(exp)<0) { /* HACK! Turn it into a long */
LITTLENUM_TYPE words[6];
gen_to_words(words,2,8L);/* These numbers are magic! */
seg(exp)=SEG_ABSOLUTE;
adds(exp)=0;
subs(exp)=0;
offs(exp)=words[1]|(words[0]<<16);
} else if(ok!=0) {
#else /* defined(NeXT) */
if(ok!=0) {
#endif /* NeXT */
seg(exp)=SEG_ABSOLUTE;
adds(exp)=0;
subs(exp)=0;
offs(exp)= (ok==10) ? 1 : 0;
as_warn("Can't deal with expression \"%s\": defaulting to %ld",exp->e_beg,offs(exp));
}
break;
default:
abort();
}
if(input_line_pointer!=exp->e_end+1)
as_bad("Ignoring junk after expression");
exp->e_end[1]=c_save;
input_line_pointer=save_in;
if(exp->e_siz) {
switch(exp->e_siz) {
case 1:
if(!isbyte(offs(exp)))
as_warn("expression doesn't fit in BYTE");
break;
case 2:
if(!isword(offs(exp)))
as_warn("expression doesn't fit in WORD");
break;
}
}
return offs(exp);
#endif /* !defined(TEST2) */
}
/* These are the back-ends for the various machine dependent pseudo-ops. */
void demand_empty_rest_of_line(); /* Hate those extra verbose names */
static
void
s_even(
int value)
{
register int temp;
register long int temp_fill;
temp = 1; /* JF should be 2? */
temp_fill = get_absolute_expression ();
frag_align(temp, (int)temp_fill);
/*
* If this alignment is larger than any previous alignment then this
* becomes the section's alignment.
*/
if(frchain_now->frch_section.align < temp)
frchain_now->frch_section.align = temp;
demand_empty_rest_of_line();
}
static
void
s_proc(
int value)
{
demand_empty_rest_of_line();
}
/* s_space is defined in read.c .skip is simply an alias to it. */
int
md_parse_option(
char **argP,
int *cntP,
char ***vecP)
{
switch(**argP) {
case 'l': /* -l means keep external to 32 bit offset
rather than 16 bit one */
break;
case 'm':
/* Gas simply ignores this option! */
(*argP)++;
if(**argP=='c')
(*argP)++;
if(!strcmp(*argP,"68000"))
flagseen['m']=2;
else if(!strcmp(*argP,"68010")) {
flagseen['m']=1;
} else if(!strcmp(*argP,"68020"))
flagseen['m']=0;
else
as_warn("Unknown -m option ignored");
while(**argP)
(*argP)++;
break;
default:
return 0;
}
return 1;
}
#ifdef TEST2
/* TEST2: Test md_assemble() */
static
int
is_label(
char *str)
{
while(*str == ' ')
str++;
while(*str && *str != ' ')
str++;
if(str[-1] == ':' || str[1] == '=')
return(1);
return(0);
}
void
main(
int argc,
char *argv[],
char *envp[])
{
char buf[120];
char *cp;
int n;
m68_ip_begin();
for(;;){
if(!gets(buf) || !*buf)
break;
if(buf[0] == '|' || buf[1] == '.')
continue;
for(cp = buf; *cp; cp++)
if(*cp == '\t')
*cp = ' ';
if(is_label(buf))
continue;
memset(&the_ins, '\0', sizeof(the_ins));
m68_ip(buf);
if(the_ins.error){
printf("Error %s in %s\n", the_ins.error, buf);
}
else{
printf("Opcode(%d.%s): ", the_ins.numo, the_ins.args);
for(n = 0; n < the_ins.numo; n++)
printf(" 0x%x", the_ins.opcode[n] & 0xffff);
printf(" ");
print_the_insn(&the_ins.opcode[0], stdout);
(void)putchar('\n');
}
for(n = 0; n < strlen(the_ins.args) / 2; n++){
if(the_ins.operands[n].error){
printf("op%d Error %s in %s\n",
n, the_ins.operands[n].error, buf);
continue;
}
printf("mode %d, reg %d, ",
the_ins.operands[n].mode, the_ins.operands[n].reg);
if(the_ins.operands[n].con1)
printf("con1: '%.*s', ",
1 + the_ins.operands[n].con1->e_end -
the_ins.operands[n].con1->e_beg,
the_ins.operands[n].con1->e_beg);
printf("ireg %d, isiz %d, imul %d, ",
the_ins.operands[n].ireg,
the_ins.operands[n].isiz,
the_ins.operands[n].imul);
if(the_ins.operands[n].con2)
printf("con2: '%.*s',",
1 + the_ins.operands[n].con2->e_end -
the_ins.operands[n].con2->e_beg,
the_ins.operands[n].con2->e_beg);
(void)putchar('\n');
}
}
m68_ip_end();
}
#endif /* TEST2 */